- 您現在的位置：買賣IC網 > PDF目錄295139 > BD00HA5EFJ-E2 ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 PDF資料下載
參數資料
| 型號： | BD00HA5EFJ-E2 |
| 元件分類： | 可調正電壓單路輸出LDO穩壓器 |
| 英文描述： | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| 封裝： | ROHS COMPLIANT, HTSOP-8 |
| 文件頁數： | 2/12頁 |
| 文件大小： | 416K |
| 代理商： | BD00HA5EFJ-E2 |
www.rohm.com
2010.10 - Rev.A
2010 ROHM Co., Ltd. All rights reserved.
Technical Note
10/11
BD00IA5WEFJ
(11) Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
A lways discharge capacitors after each process or step. Always turn the IC’s power supply off before connecting it to or
removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic
measure. Use similar precaution when transporting or storing the IC.
(12) Regarding input pin of the IC
This monolithic IC contains P+ isolation and P substrate layers between adjacent elements in order to keep them isolated.
P-N junctions are formed at the intersection of these P layers with the N layers of other elements, creating a parasitic diode
or transistor. For example, the relation between each potential is as follows:
When GND > Pin A and GND > Pin B, the P-N junction operates as a parasitic diode.
When GND > Pin B, the P-N junction operates as a parasitic transistor.
Parasitic diodes can occur inevitable in the structure of the IC. The operation of parasitic diodes can result in mutual
interference among circuits, operational faults, or physical damage. Accordingly, methods by which parasitic diodes
operate, such as applying a voltage that is lower than the GND (P substrate) voltage to an input pin, should not be used.
(13) Ground Wiring Pattern.
When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns,
placing a single ground point at the ground potential of application so that the pattern wiring resistance and voltage
variations caused by large currents do not cause variations in the small signal ground voltage. Be careful not to change the
GND wiring pattern of any external components, either.
Resistor
Transistor (NPN)
N
N P+
P
+
P
P substrate
GND
Parasitic element
Pin A
N
P
+
P
+
P
P substrate
GND
Parasitic element
Pin B
C
B
E
N
GND
Pin A
Parasitic
element
Pin B
Other adjacent elements
E
B
C
GND
Parasitic
element
相關PDF資料 |
PDF描述 |
|---|---|
| BD00HA5WEFJ-E2 | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| BD00HA5WEFJ | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| BD45485G | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| BD4837FVE | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| BD538 | Complemetary Silicon Power Transistors(互補硅功率晶體管) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BD00HA5MEFJ-M | 制造商:ROHM 制造商全稱:Rohm 功能描述:Automotive 0.5A Variable Output LDO Regulator |
| BD00HA5MEFJ-ME2 | 功能描述:Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5 V ~ 7 V 500mA 8-HTSOP-J 制造商:rohm semiconductor 系列:汽車級，AEC-Q100 包裝:* 零件狀態:有效 穩壓器拓?fù)?正，可調式 電壓 - 輸出:1.5 V ~ 7 V 電流 - 輸出:500mA 電壓 - 跌落（典型值）:0.6V @ 500mA 穩壓器數:1 電壓 - 輸入:4.5 V ~ 8 V 電流 - 限制（最小值）:- 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬）裸焊盤 供應商器件封裝:8-HTSOP-J 標準包裝:1 |
| BD00HA5WEFJ | 制造商:ROHM 制造商全稱:Rohm 功能描述:500mA Secondary Variable Output LDO Regulators for Local Power Supplies |
| BD00HA5WEFJ_13 | 制造商:ROHM 制造商全稱:Rohm 功能描述:500mA Variable Fixed Output LDO Regulators |
| BD00HA5WEFJ-E2 | 功能描述:低壓差穩壓器 - LDO LDO REG 0.8V-7V 0.5A 8PIN RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓（最大值）:307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20 |
發布緊急采購，3分鐘左右您將得到回復。