Data Sheet
World Modem FAX
Page 26 of 62
2005, Copeland Communications, Inc.
World Modem FAX Datasheet Rev 1.0
Extended AT\ Command Set (Command Defaults in Bold)
Command
Action
\$
Display AT\ command settings.
\Bn
Character length will be automatically set in autobaud mode.
\B0
6N1 - six data bits, no parity, one stop bit, one start bit, eight bits total (\N0 only)
1
\B1
7N1 - seven data bits, no parity, one stop bit, one start bit, nine bits total (\N0 only)
1
\B2
7P1 - seven data bits, parity options by \P, one stop bit, one start bit, 10 bits total.
\B3
8N1 - eight data bits, no parity, one stop bit, one start bit, 10 bits total.
\B5
8P1 - eight data bits, parity optioned by \P, one stop bit, one start bit, 11 bits total (\N0 only).
\B6
8X1 - eight data bits, one escape bit, one stop bit, one start bit, 11 bits total (enables ninth-bit
escape mode).
\Pn
Parity type will be automatically set in autobaud mode.
\P0
Even
\P1
Space
1
\P2
Odd
\P3
Mark
1
\U
Serial mode – causes a low pulse (25 ms) on -RI and -DCD. –INT to be the inverse of ESC. –
RTS to be inverse of –CTS
Parallel mode – causes a low pulse (25 ms) on –INT.
This command terminates with a –RESET
\Vn
Connect message type.
\V0
Report connect message and protocol message.
\V2
Report connect message only (exclude protocol message).
\V4
Report connect and protocol message with both upstream nad downstream connect rates.
Notes:
1. When in autobaud mode, \B0, \B1, and \P1 will not be detected automatically. The combination of \B2 and \P3 will be
detected. This is compatible with 7N2. 7N1 may be forced by sending AT\T17\B1.
2. The autobaud feature does not detect this rate.
3. Default is \T16. \T9 may be defaulted as an order option. Contact the factory for details