參數資料
型號： CH7006C
廠商： Electronic Theatre Controls, Inc.
英文描述： MODULE
中文描述： 數字電視編碼器電腦功能
文件頁數： 26/49頁
文件大?。?/td> 338K
代理商： CH7006C
CHRONTEL
CH7006C
26
201-0000-026 Rev 2.1, 8/2/99
Transfer Protocols
(continued)
AutoInc
Register Address Auto-Increment - to facilitate sequential R/W of registers.
“1”:
Auto-Increment enabled (auto-increment mode).
Write: After writing data into a register, the Address Register will automatically be
incremented by one.
Read: Before loading data from a register to the on-chip temporary register (getting ready to
be serially read), the Address Register will automatically be incremented by one.
However, for the first read after an RAB, the Address Register will not be changed.
“0”:
Auto-Increment disabled (alternating mode).
Write: After writing data into a register, the Address Register will remain unchanged until a
new RAB is written.
Read: Before loading data from a register to the on-chip temporary register (getting ready to
be serially read), the Address Register will remain unchanged.
AR[5:0]
Specifies the Address of the Register to be Accessed.
This register address is loaded into the Address Register of the CH7006. The R/W access, which
follows, is directed to the register specified by the content stored in the Address Register.
The following two sections describe the operation of the serial interface for the four combinations of R/W = 0,1 and
AutoInc = 0,1.
CH7006 Write Cycle Protocols (R/W = 0)
Data transfer with acknowledge is required. The acknowledge-related clock pulse is generated by the master-
transmitter. The master-transmitter releases the SD line (HIGH) during the acknowledge clock pulse. The slave-
receiver must pull down the SD line, during the acknowledge clock pulse, so that it remains stable LOW during the
HIGH period of the clock pulse. The CH7006 always acknowledges for writes (see
Figure 21
). Note that the
resultant state on SD is the wired-AND of data outputs from the transmitter and receiver.
Figure 21: Acknowledge on the Bus
Figure 22
shows two consecutive alternating write cycles for AutoInc = 0 and R/W = 0. The byte of information,
following the Register Address Byte (RAB), is the data to be written into the register specified by AR[5:0]. If
AutoInc = 0, then another RAB is expected from the master device, followed by another data byte, and so on.
SC from
Master
SD Data Output
By the CH7006
Start
Condition
2
SD Data Output
By Master-Transmitter
1
8
9
not acknowledge
acknowledge
clock pulse for
acknowledgment
相關PDF資料
PDF描述
CH7006C-T Circular Connector; Body Material:Aluminum; Series:PT06; Number of Contacts:18; Connector Shell Size:14; Connecting Termination:Crimp; Circular Shell Style:Straight Plug; Circular Contact Gender:Socket; Insert Arrangement:14-18
CH7006C-V Circular Connector; Body Material:Aluminum; Series:PT06; No. of Contacts:18; Connector Shell Size:14; Connecting Termination:Crimp; Circular Shell Style:Straight Plug; Circular Contact Gender:Socket; Insert Arrangement:14-18
CH7013A Digital PC to TV Encoder
CH7013A-T Digital PC to TV Encoder
CH7013A-V Digital PC to TV Encoder
相關代理商/技術參數
參數描述
CH7006C-T 制造商:MISCELLANEOUS 功能描述:
CH7006C-V 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Digital PC to TV Encoder Features
CH7007A 制造商:未知廠家 制造商全稱:未知廠家 功能描述:DIGITAL PC TO TV ENCODER WITH MACROVISION
CH7007A-T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:DIGITAL PC TO TV ENCODER WITH MACROVISION
CH7007A-V 制造商:未知廠家 制造商全稱:未知廠家 功能描述:DIGITAL PC TO TV ENCODER WITH MACROVISION
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*