- 您現在的位置：買賣IC網 > PDF目錄298985 > DCP021212P 1-OUTPUT DC-DC UNREG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | DCP021212P |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT DC-DC UNREG PWR SUPPLY MODULE |
| 封裝： | PLASTIC, DIP-14 |
| 文件頁數： | 7/7頁 |
| 文件大?。?/td> | 108K |
| 代理商： | DCP021212P |
7
DCP02
FIGURE 2. Connecting Dual Outputs in Series.
ADDITIONAL FUNCTIONS
DISABLE/ENABLE
The DCP02 can be disabled or enabled by driving the SYNC
pin using an open drain CMOS gate. If the SYNC pin is
pulled low, the DCP02 will be disabled. The disable time
depends upon the external loading; the internal disable func-
tion is implemented in 2
s. Removal of the pull down will
cause the DCP02 to be enabled.
Capacitive loading on the SYNC pin should be minimized in
order to prevent a reduction in the oscillator frequency.
DECOUPLING
Ripple Reduction
The high switching frequency of 400kHz allows simple
filtering. To reduce ripple, it is recommended that a 1
F
capacitor is used on VOUT. Dual outputs should both be
decoupled to pin 5. A 2.2
F capacitor on the input is
recommended.
Connecting the DCP02 in Series
Multiple DCP02 isolated 2W DC/DC converters can be
connected in series to provide nonstandard voltage rails.
This is possible by utilizing the floating outputs provided by
the DCP02’s galvanic isolation.
Connect the positive VOUT from one DCP02 to the negative
VOUT (0V) of another (see Figure 1). If the SYNC pins are
tied together, the self-synchronization feature of the DCP02
will prevent beat frequencies on the voltage rails. The SYNC
feature of the DCP02 allows easy series connection without
external filtering, minimizing cost.
The outputs on dual output DCP02 versions can also be
connected in series to provide two times the magnitude of
VOUT as shown in Figure 2. For example, a dual 15V
DCP022415D could be connected to provide a 30V rail.
Connecting the DCP02 in Parallel
If the output power from one DCP02 is not sufficient, it is
possible to parallel the outputs of multiple DCP02s, as
shown in Figure 3. Again, the SYNC feature allows easy
synchronization to prevent power-rail beat frequencies at no
additional filtering cost.
DCP
02
+V
OUT
V
SUPPLY
+V
OUT
–V
OUT
–V
OUT
0V
V
S
0V
COM
FIGURE 3. Connecting Multiple DCP02s in Parallel.
DCP
02
0V
V
OUT
V
SUPPLY
V
S
0V
DCP
02
V
OUT
2 x Power Out
SYNC
V
S
0V
COM
相關PDF資料 |
PDF描述 |
|---|---|
| DCR0008A | CERAMIC RESONATOR, 881 MHz |
| DCR0023A | CERAMIC RESONATOR, 1643 MHz |
| DCR010505P | 1-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE |
| DCT104803P | SWITCHING REGULATOR, 440 kHz SWITCHING FREQ-MAX, PDIP22 |
| DCW1033 | DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DCP021212P | 制造商:Texas Instruments 功能描述:DC/DC CONVERTER 2W 12V/12V 21212 |
| DCP021212PDVB | 制造商:TI 制造商全稱:Texas Instruments 功能描述:Miniature, 2W, Isolated UNREGULATED DC/DC CONVERTERS |
| DCP021212PNVA | 制造商:TI 制造商全稱:Texas Instruments 功能描述:Miniature, 2W, Isolated UNREGULATED DC/DC CONVERTERS |
| DCP021212U | 功能描述:DC/DC轉換器 Mini 2W Iso Unreg DC/DC Converter RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| DCP021212U/1K | 功能描述:DC/DC轉換器 Mini 2W Iso Unreg DC/DC Converter RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
發布緊急采購，3分鐘左右您將得到回復。