VP" />
參數資料
型號： DS2408S+
廠商： Maxim Integrated Products
文件頁數： 11/39頁
文件大?。?/td> 0K
描述： IC SWITCH 8-CHAN ADDRESS 16SOIC
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 50
接口： 1 線
輸入/輸出數： 8
中斷輸出： 無
電源電壓： 2.8 V ~ 5.25 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 16-SOIC（0.154"，3.90mm 寬）
供應商設備封裝： 16-SOIC
包裝： 管件
DS2408
19 of 39
Figure 11. HARDWARE CONFIGURATION
OPEN-DRAIN
PORT PIN
RX = RECEIVE
TX = TRANSMIT
100
MOSFET
VPUP
RX
TX
RX
DATA
SEE
TEXT
SIMPLE BUS MASTER
DS2408 1-Wire PORT
RPUP
DS2480B
+5V
HOST CPU
VDD
POL
RXD
TXD
VPP
1-W
NC
GND
SERIAL IN
SERIAL OUT
SERIAL
PORT
TO 1-Wire DATA
DS2480B BUS MASTER
A multidrop bus consists of a 1-Wire bus with multiple slaves attached. At standard speed the 1-Wire bus
has a maximum data rate of 15.3kbps. Communication speed for 1-Wire devices can be typically boosted
to 142kbps by activating the overdrive mode; however, the maximum overdrive data rate for the DS2408
is 100kbps. The value of the pullup resistor primarily depends on the network size and load conditions.
For most applications the optimal value of the pullup resistor will be approximately 2.2k for standard
speed and 1.5k for overdrive speed.
The idle state for the 1-Wire bus is high. If for any reason a transaction needs to be suspended, the bus
MUST be left in the idle state if the transaction is to resume. If this does not occur and the bus is left low
for more than 16s (overdrive speed) or more than 120s (standard speed), one or more devices on the
bus may be reset. With the DS2408 the bus must be left low for no longer than 13s at overdrive speed to
ensure that none of the slave devices on the 1-Wire bus performs a reset. The DS2408 communicates
properly when used in conjunction with a DS2480B 1-Wire driver and serial port adapters that are based
on this driver chip. When operating the device in overdrive or below 4.5V, some 1-Wire I/O timing
values must be modified (see EC table).
相關PDF資料
PDF描述
MAX7300AAI+ IC I/O EXPANDER I2C 28B 28SSOP
MAX7311AUG+ IC I/O EXPANDER I2C 16B 24TSSOP
MAX7311ATG+ IC I/O EXPANDER I2C 16B 24TQFN
MAX7311AWG+ IC I/O EXPANDER I2C 16B 24SOIC
MAX7314ATG+ IC I/O EXPANDER I2C 16B 24TQFN
相關代理商/技術參數
參數描述
DS2408S/R 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:1-Wire 8-Channel Addressable Switch
DS2408S/T 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:1-Wire 8-Channel Addressable Switch
DS2408S/T&R 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59
DS2408S+ 功能描述:接口 - 專用 1-Wire 8-Ch Addressable Switch RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59
DS2408S+T&R 制造商:Maxim Integrated Products 功能描述:ADDRESSABLE SWIT 16SOIC N - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC SWITCH 8-CHAN ADDRESS 16SOIC 制造商:Maxim Integrated Products 功能描述:Interface - Specialized 1-Wire 8-Ch Addressable Switch
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*