ADG790
Rev. A | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
Rating
VDD to GND
0.3 V to +4.6 V
0.3 V to VDD + 0.3 V or
10 mA, whichever occurs first
Peak Current, S Pin or D Pin
100 mA (pulsed at 1 ms, 10%
duty cycle maximum)
Continuous Current,
S Pin or D Pin
30 mA
Operating Temperature Range
40°C to +85°C
Storage Temperature Range
65°C to +125°C
Junction Temperature
150°C
80°C/W
Reflow Soldering (Pb Free)
Peak Temperature
260°C (+0°C/5°C)
Time at Peak Temperature
As per JEDEC J-STD-20
1 Overvoltages at INx, S pin or D pin are clamped by internal diodes. Limit
current to the maximum ratings given.
2 Measured with the device soldered on a 4-layer board.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
ESD CAUTION