
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com
Revision Date: October 2002
Document No. 18283 - 3
DATA SHEET
G
FEATURES
10/8-bit progressive scan output up to 1080p60
support for multiplexed and non-mutiplexed Y/C video
multi-directional edge detection processing
adaptive inter-field motion detection
seamless interface to Gennum's GF9331 motion
co-processor
fully configurable to support custom video modes
3:2 film mode operation for HDTV/SDTV inputs
programmable noise reduction and detail enhancement
de-interlace, pass-through and film rate down
conversion modes of operation
seamless interface to popular ADCs and NTSC/PAL
decoders
ability to extract HVF information from embedded TRS
selectable rounding and clipping of output data
selectable blanking of active video lines
HVF output signals with programmable output video
cropping
serial/parallel host interface
3.3V supply for device I/O and 2.5V for core logic
5V tolerant inputs
APPLICATIONS
HDTV Up/Down Converters
Production Equipment
Video Walls
Projection Systems
Plasma Displays
LCD TVs
Home Theatre Systems
HD DVD Players
DEVICE OVERVIEW
The GF9330 is a 10-bit high performance VDSP engine that
performs high quality motion adaptive de-interlacing of
interlaced digital video signals. The GF9330 supports
standard definition (SDTV) and high definition (HDTV) signal
formats and clock rates up to 1080p60 with support for
arbitrary display modes.
The GF9330 uses multi-directional adaptive filters for edge
processing, an adaptive vertical motion filter and an
adaptive inter-field motion filter. The GF9330 features detail
enhancement and noise reduction capabilities. The GF9330
also supports 3:2 pull-down, static/freeze-frame detection
and compensation and film rate conversions. The GF9330
may operate as a stand-alone de-interlacer or may be used
with the GF9331 Motion Co-processor to enable higher
quality HD/SD de-interlacing with edge and vertical motion
detection. The two devices can be configured in tandem
such that the GF9331 sends edge detection and vertical
motion filter control information to the GF9330. These
control signals adaptively switch the GF9330's internal
filters on a pixel-by-pixel basis.
The GF9330 integrates all required line delays and
seamlessly interfaces to off chip SDRAMs that form the
required field delays. The device may also operate in
by-pass mode should no processing of the input signal be
desired.
BLOCK DIAGRAM
ORDERING INFORMATION
PART NUMBER
PACKAGE
TEMP RANGE
GF9330-CBP
328 PIN BGA
0°C to 70°C
GF9330
High Performance
HDTV/SDTV Deinterlacer
Noise
Reducer
Detail
Enhancer
3:2
Pulldown
Detector
Inter-field
Motion
Detector
Edge Adaptive
Interpolator
Vertical Motion
Adaptive Interpolator
Inter-field Motion
Adaptive Interpolator
Field Merging
Selector
Output
Processing
Host
Interface
Timing
Generator
External Memory Interface
Input
Processing
Control bus from GF9331
Processed Y/C
Y/C