1
HA-5002
110MHz, High Slew Rate, High Output
Current Buffer
The HA-5002 is a monolithic, wideband, high slew rate, high
output current, buffer amplifier.
Utilizing the advantages of the Intersil D.I. technologies, the
HA-5002 current buffer offers 1300V/
μs slew rate with
110MHz of bandwidth. The
±200mA output current capability
is enhanced by a 3
Ω output impedance.
The monolithic HA-5002 will replace the hybrid LH0002 with
corresponding performance increases. These characteristics
range from the 3000k
Ω input impedance to the increased
output voltage swing. Monolithic design technologies have
allowed a more precise buffer to be developed with more than
an order of magnitude smaller gain error.
The HA-5002 will provide many present hybrid users with a
higher degree of reliability and at the same time increase
overall circuit performance.
For the military grade product, refer to the HA-5002/883
datasheet.
Features
Voltage gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.995
High input impedance . . . . . . . . . . . . . . . . . . . . . .3000k
Ω
Low output impedance . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ω
Very high slew rate. . . . . . . . . . . . . . . . . . . . . . . 1300V/
μs
Very wide bandwidth . . . . . . . . . . . . . . . . . . . . . . 110MHz
High output current
. . . . . . . . . . . . . . . . . . . . . . . . . . ±200mA
Pulsed output current . . . . . . . . . . . . . . . . . . . . . . . 400mA
Monolithic construction
Pb-Free available (RoHS Compliant)
Applications
Line driver
Data acquisition
110MHz buffer
Radar cable driver
High power current booster
High power current source
Sample and holds
Video products
Ordering Information
PART NUMBER
PART MARKING
TEMP.
RANGE (°C)
PACKAGE
PKG.
DWG. #
HA2-5002-2
HA2- 5002-2
-55 to +125
8 Pin Metal Can
T8.C
HA4P 5002-5Z
0 to +75
20 Ld PLCC (Pb-free)
N20.35
5002 5Z
0 to +75
8 Ld SOIC (Pb-free)
M8.15
5002 9Z
-40 to +85
8 Ld SOIC (Pb-free)
M8.15
NOTE:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
October 18, 2013
FN2921.12
Data Sheet
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Copyright Intersil Americas LLC 2003-2006, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.