- 您現在的位置：買賣IC網 > PDF目錄370575 > HFBR-5113 Low Cost, Industry Standard FDDI MIC Transceivers(Standard 1x13)(低價格，工業標準 FDDI MIC收發器(標準1x13)) PDF資料下載
參數資料
| 型號： | HFBR-5113 |
| 英文描述： | Low Cost, Industry Standard FDDI MIC Transceivers(Standard 1x13)(低價格，工業標準 FDDI MIC收發器(標準1x13)) |
| 中文描述： | 成本低，行業標準FDDI的麥克風收發器（標準1x13）（低價格，工業標準FDDI的麥克風收發器（標準1x13）） |
| 文件頁數： | 9/16頁 |
| 文件大?。?/td> | 278K |
| 代理商： | HFBR-5113 |
9
Electrostatic Discharge
There are two design cases in
which immunity to ESD damage
is important.
The first is during handling of the
transceiver prior to mounting it
on the circuit board. It is
important to use normal ESD
handling precautions for ESD-
sensitive devices. These precau-
tions include using grounded
wrist straps, work benches, and
floor mats in ESD-controlled
areas.
The second case to consider is
static discharges to the exterior
of the equipment chassis con-
taining the transceiver parts. To
the extent that the MIC connector
is exposed to the outside of the
equipment chassis, it may be
subject to whatever ESD system
level test criteria that the
equipment is intended to meet.
Electromagnetic Interference
(EMI)
Most equipment designs utilizing
these high speed transceivers
from Agilent will be required to
meet the requirements of FCC in
the United States, CENELEC
EN55022 (CISPR 22) in Europe
and VCCI in Japan. Hence, the
HFBR-511X Series of fiber optic
transceivers meet the regulatory
requirements listed in Table 1.
Immunity
Equipment utilizing these
transceivers will be subject to
radio-frequency electromagnetic
fields in some environments.
These transceivers have a high
immunity to such fields. The
internal construction of the
HFBR-511X Series is similar to
that of the HFBR-510X/-520X
series. Therefore, for additional
information regarding EMI sus-
ceptibility, ESD, and conducted
noise testing procedures and
results, please refer to Applica-
tion Note 1075,
Testing and
Measuring Electromagnetic
Compatibility Performance of
the HFBR-510X/-520X Fiber
Optic Transceivers.
Flammability Rating
The housing material of the
HFBR-5111/-5112/-5113 trans-
ceiver has been approved for UL
flammability rating of 94V-0
under General Electric’s UL file
number E121562 and similarly
under CSA file number LS88480.
Transceiver Reliability and
Performance Qualification
Data
As with all Agilent components,
the HFBR-511X series
transceivers undergo extensive
Agilent reliability and perform-
ance qualification testing. Details
are available from your Agilent
sales representative.
These transceivers are manu-
factured at the Agilent Singapore
location which is an ISO 9001
certified facility.
Ordering Information
The Agilent FDDI transceivers are
available packaged with or
without key inserts per Table 2.
The key inserts are colored-coded
plastic parts with an identifying
key letter molded into the top
surface of each key.
The HFBR-5111/-5112/-5113
products are available through
the Agilent Component Field
Sales Offices and Authorized
Distributors worldwide.
Table 1. Regulatory Compliance Table
Feature
Electrostatic Discharge
(ESD) to the Electrical Pins
Test Method
MIL-STD-883C
Method 3015.4
Performance
Meets Class 2 (2000 to 3999 Volts)
Withstands up to 2200 V applied between
electrical pins.
Typically withstand at least 25 kV without
damage when the MIC Receptacle is contacted
by a Human Body Model probe.
Typically provide a 13 dB margin to the noted
standard limits when tested at a certified
test range with the transceiver mounted to a
circuit card without a chassis enclosure.
Typically show no measurable effect from a
10 V/m field swept from 10 to 450 MHz
applied to the transceiver when mounted to a
circuit card without a chassis enclosure.
Electrostatic Discharge
(ESD) to the MIC Receptacle
Variation of IEC 801-2
Electromagnetic Interference
(EMC)
FCC Class B
CENELEC CEN55022
Class B (CISPR 22B)
VCCI Class 2
Variation of IEC 801-3
Immunity
相關PDF資料 |
PDF描述 |
|---|---|
| HFBR-5203T | 800 nm 300 m，ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style(800 nm 300 m，應用于SONET OC-3/SDH STM-1的ATM多模式光收發器（低價格1x9 封裝類型）) |
| HFBR-5203 | 800 nm 300 m，ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style(800 nm 300 m，應用于SONET OC-3/SDH STM-1的ATM多模式光收發器（低價格1x9 封裝類型）) |
| HFBR-5204T | 1300 nm 1x9 Transceiver(1300 nm 1x9 收發器) |
| HFBR-5105 | 1300nm 500 m，F(xiàn)DDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style(1300nm 500 m，F(xiàn)DDI, 100 Mbps ATM, 快速以太網收發器（低價格 1x9 封裝類型）) |
| HFBR-5204 | 1300 nm 1x9 Transceiver(1300 nm 1x9 收發器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFBR-5198 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Low Cost, Industry Standard FDDI MIC Transceivers |
| HFBR-5203 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style |
| HFBR-5203T | 制造商:HP 制造商全稱:Agilent(Hewlett-Packard) 功能描述:ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style |
| HFBR5204 | 制造商:Avago Technologies 功能描述: |
| HFBR-5204 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:ATM Multimode Fiber Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1x9 Package Style |
發布緊急采購，3分鐘左右您將得到回復。