IDT72V3640/50/60/70/80/90 3.3V HIGH DENSITY SUPERSYNC IITM
參數資料
型號： IDT72V3650L15PF8
廠商： IDT, Integrated Device Technology Inc
文件頁數： 36/46頁
文件大小： 0K
描述： IC FIFO SS 2048X36 15NS 128-TQFP
標準包裝： 1,000
系列： 72V
功能： 異步，同步
存儲容量： 72K（2K x 36）
數據速率： 67MHz
訪問時間： 15ns
電源電壓： 3.15 V ~ 3.45 V
工作溫度： 0°C ~ 70°C
安裝類型： 表面貼裝
封裝/外殼： 128-LQFP
供應商設備封裝： 128-TQFP（14x20）
包裝： 帶卷 (TR)
其它名稱： 72V3650L15PF8
41
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
IDT72V3640/50/60/70/80/90 3.3V HIGH DENSITY SUPERSYNC IITM 36-BIT FIFO
1,024 x 36, 2,048 x 36, 4,096 x 36, 8,192 x 36, 16,384 x 36 and 32,768 x 36
OCTOBER 22, 2008
Figure 30. Block Diagram of 2,048 x 36, 4,096 x 36, 8,192 x 36, 16,384 x 36, 32,768 x 36 and 65,536 x 36 Depth Expansion
DEPTH EXPANSION CONFIGURATION (FWFT MODE ONLY)
The IDT72V3640 can easily be adapted to applications requiring depths
greater than 1,024, 2,048 for the IDT72V3650, 4,096 for the IDT72V3660,
8,192 for the IDT72V3670, 16,384 for the IDT72V3680 and 32,768 for the
IDT72V3690 with an 36-bit bus width. In FWFT mode, the FIFOs can be
connected in series (the data outputs of one FIFO connected to the data inputs
of the next) with no external logic necessary. The resulting configuration
provides a total depth equivalent to the sum of the depths associated with each
single FIFO. Figure 30 shows a depth expansion using two IDT72V3640/
72V3650/72V3660/72V3670/72V3680/72V3690 devices.
CareshouldbetakentoselectFWFTmodeduringMasterResetforallFIFOs
in the depth expansion configuration. The first word written to an empty
configuration will pass from one FIFO to the next ("ripple down") until it finally
appears at the outputs of the last FIFO in the chain – no read operation is
necessarybuttheRCLKofeachFIFOmustbefree-running. Eachtimethedata
word appears at the outputs of one FIFO, that device's
OR line goes LOW,
enabling a write to the next FIFO in line.
For an empty expansion configuration, the amount of time it takes for
ORof
the last FIFO in the chain to go LOW (i.e. valid data to appear on the last FIFO's
outputs) after a word has been written to the first FIFO is the sum of the delays
for each individual FIFO:
(N – 1)*(4*transfer clock) + 3*TRCLK
whereNisthenumberofFIFOsintheexpansionandTRCLKistheRCLKperiod.
Note that extra cycles should be added for the possibility that the tSKEW1
specificationisnotmetbetweenWCLKandtransferclock,orRCLKandtransfer
clock, for the
OR flag.
The"rippledown"delayisonlynoticeableforthefirstwordwrittentoanempty
depth expansion configuration. There will be no delay evident for subsequent
words written to the configuration.
The first free location created by reading from a full depth expansion
configurationwill"bubbleup"fromthelastFIFOtothepreviousoneuntilitfinally
movesintothefirstFIFOofthechain. Eachtimeafreelocationiscreatedinone
FIFO of the chain, that FIFO's
IRlinegoesLOW,enablingtheprecedingFIFO
to write a word to fill it.
Forafullexpansionconfiguration,theamountoftimeittakesfor
IRofthefirst
FIFO in the chain to go LOW after a word has been read from the last FIFO is
the sum of the delays for each individual FIFO:
(N – 1)*(3*transfer clock) + 2 TWCLK
where N is the number of FIFOs in the expansion and TWCLK is the WCLK
period. NotethatextracyclesshouldbeaddedforthepossibilitythatthetSKEW1
specificationisnotmetbetweenRCLKandtransferclock,orWCLKandtransfer
clock, for the
IR flag.
The Transfer Clock line should be tied to either WCLK or RCLK, whichever
isfaster. Boththeseactionsresultindatamoving,asquicklyaspossible,tothe
end of the chain and free locations to the beginning of the chain.
Dn
INPUT READY
WRITE ENABLE
WRITE CLOCK
WEN
WCLK
IR
DATA IN
RCLK
READ CLOCK
RCLK
REN
OE
OUTPUT ENABLE
OUTPUT READY
Qn
Dn
IR
GND
WEN
WCLK
OR
REN
OE
Qn
READ ENABLE
OR
DATA OUT
IDT
72V3640
72V3650
72V3660
72V3670
72V3680
72V3690
TRANSFER CLOCK
4667 drw 35
n
FWFT/SI
IDT
72V3640
72V3650
72V3660
72V3670
72V3680
72V3690
相關PDF資料
PDF描述
MS27467E17B35SB CONN PLUG 55POS STRAIGHT W/SCKT
LTC1350IG#PBF IC TXRX 3.3V EIA/TIA-562 28-SSOP
VI-B3B-MX-B1 CONVERTER MOD DC/DC 95V 75W
VE-B6P-IV-F1 CONVERTER MOD DC/DC 13.8V 150W
IDT72V3631L15PF8 IC SYNCFIFO 512X36 15NS 120-TQFP
相關代理商/技術參數
參數描述
IDT72V3650L15PFI 功能描述:IC FIFO SS 2048X36 15NS 128-TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF
IDT72V3650L15PFI8 功能描述:IC FIFO SS 2048X36 15NS 128-TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF
IDT72V3650L6BB 功能描述:IC FIFO SS 2048X36 6NS 144-BGA RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF
IDT72V3650L6BB8 功能描述:IC FIFO SS 2048X36 6NS 144-BGA RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF
IDT72V3650L6PF 功能描述:IC FIFO SS 2048X36 6NS 128-TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*