- 您現在的位置：買賣IC網 > PDF目錄9994 > IDT72V3651L20PF8 (IDT, Integrated Device Technology Inc)IC SYNCFIFO 2048X36 20NS 120TQFP PDF資料下載
參數資料
| 型號： | IDT72V3651L20PF8 |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 16/21頁 |
| 文件大小： | 0K |
| 描述： | IC SYNCFIFO 2048X36 20NS 120TQFP |
| 標準包裝： | 750 |
| 系列： | 72V |
| 功能： | 異步，同步 |
| 存儲容量： | 72K（2K x 36） |
| 數據速率： | 520Mbs |
| 訪問時間： | 20ns |
| 電源電壓： | 3 V ~ 3.6 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 120-LQFP |
| 供應商設備封裝： | 120-TQFP（14x14） |
| 包裝： | 帶卷 (TR) |
| 其它名稱： | 72V3651L20PF8 |
4
COMMERCIALTEMPERATURERANGE
IDT72V3631/72V3641/72V3651
3.3V CMOS SYNCFIFO 512 x 36, 1,024 x 36 and 2,048 x 36
PIN DESCRIPTION
Symbol
Name
I/O
Description
A0-A35
Port-A Data
I/O 36-bit bidirectional data port for side A.
AE
Almost-Empty
O
Programmable flag synchronized to CLKB. It is LOW when the number of words in the FIFO is less than or equal to
Flag
the value in the Almost-Empty register (X).
AF
Almost-Full
O
Programmable flag synchronized to CLKA. It is LOW when the number of empty locations in the FIFO is less than or
Flag
equal to the value in the Almost-Full Offset register (Y).
B0-B35
Port-B Data
I/O 36-bit bidirectional data port for side B.
CLKA
Port-A Clock
I
CLKA is a continuous clock that synchronizes all data transfers through port-A and may be asynchronous or
coincident to CLKB. IR and
AF are synchronous to the LOW-to-HIGH transition of CLKA.
CLKB
Port-B Clock
I
CLKB is a continuous clock that synchronizes all data transfers through port-B and may be asynchronous or
coincident to CLKA. OR and
AE are synchronous to the LOW-to-HIGH transition of CLKB.
CSA
Port-A Chip
I
CSA must be LOW to enable a LOW-to-HIGH transition of CLKA to read or write data on port-A. The A0-A35
Select
outputs are in the high-impedance state when
CSA is HIGH.
CSB
Port-B Chip
I
CSB must be LOW to enable a LOW-to-HIGH transition of CLKB to read or write data on port-B. The B0-B35
Select
outputs are in the high-impedance state when
CSB is HIGH.
ENA
Port-A Enable
I
ENA must be HIGH to enable a LOW-to-HIGH transition of CLKA to read or write data on port-A.
ENB
Port-B Enable
I
ENB must be HIGH to enable a LOW-to-HIGH transition of CLKB to read or write data on port-B.
FS1/
Flag-Offset
I
FS1/
SEN and FS0/SD are dual-purpose inputs used for flag Offset register programming. During a device reset,
SEN,
Select 1/
FS1/
SENandFS0/SDselectstheflagoffsetprogrammingmethod.ThreeOffsetregisterprogrammingmethodsare
Serial Enable
available: automatically load one of two preset values, parallel load from port A, and serial load.
FS0/SD
Flag Offset 0/
When serial load is selected for flag Offset register programming, FS1/
SEN is used as an enable synchronous to
Serial Data
the LOW-to-HIGH transition of CLKA. When FS1/
SEN is LOW, a rising edge on CLKA load the bit present on FS0/
SD into the X and Y registers. The number of bit writes required to program the Offset registers is 18/20/22 for the
IDT72V3631/72V3641/72V3651 respectively. The first bit write stores the Y-register MSB and the last bit write stores
the X-register LSB.
IR
Input Ready
O
IR is synchronized to the LOW-to-HIGH transition of CLKA. When IR is LOW, the FIFO is full and writes to its
Flag
array are disabled. When the FIFO is in retransmit mode, IR indicates when the memory has been filled to the point
of the retransmit data and prevents further writes. IR is set LOW during reset and is set HIGH after reset.
MBA
Port-A Mailbox
I
A HIGH level chooses a mailbox register for a port-A read or write operation.
Select
MBB
Port-B Mailbox
I
A HIGH level chooses a mailbox register for a port-B read or write operation. When the B0-B35 outputs are active,
Select
a HIGH level on MBB selects data from the mail1 register for output and a LOW level selects FIFO data for output.
MBF1
Mail1 Register
O
MBF1 is set LOW by the LOW-to-HIGH transition of CLKA that writes data to the mail1 register. MBF1 is set HIGH
Flag
by a LOW-to-HIGH transition of CLKB when a port-B read is selected and MBB is HIGH.
MBF1 is set HIGH by a
reset.
MBF2
Mail2 Register
O
MBF2 is set LOW by the LOW-to-HIGH transition of CLKB that writes data to the mail2 register. MBF2 is set HIGH
Flag
by a LOW-to-HIGH transition of CLKA when a port-A read is selected and MBA is HIGH.
MBF2 is set HIGH by a
reset.
OR
Output Ready
O
OR is synchronized to the LOW-to-HIGH transition of CLKB. When OR is LOW, the FIFO is empty and reads are
Flag
disabled. Ready data is present in the output register of the FIFO when OR is HIGH. OR is forced LOW during the
reset and goes HIGH on the third LOW-to-HIGH transition of CLKB after a word is loaded to empty memory.
RFM
Read From
I
When the FIFO is in retransmit mode, a HIGH on RFM enables a LOW-to-HIGH transition of CLKB to reset the read
Mark
pointer to the beginning retransmit location and output the first selected retransmit data.
RST
Reset
I
To reset the device, four LOW-to-HIGH transitions of CLKA and four LOW-to-HIGH transitions of CLKB must occur
while
RST is LOW. The LOW-to-HIGH transition of RST latches the status of FS0 and FS1 for AF and AE offset
selection.
RTM
Retransmit
I
When RTM is HIGH and valid data is present in the FIFO output register (OR is HIGH), a LOW-to-HIGH transition
Mode
of CLKB selects the data for the beginning of a retransmit and puts the FIFO in retransmit mode. The selected word
remains the initial retransmit point until a LOW- to-HIGH transition of CLKB occurs while RTM is LOW, taking the FIFO
out of retransmit mode.
W/
RA
Port-AWrite/
I
A HIGH selects a write operation and a LOW selects a read operation on port A for a LOW-to-HIGH transition of
Read Select
CLKA. The A0-A35 outputs are in the high-impedance state when W/
RA is HIGH.
W/RB
Port-BWrite/
I
A LOW selects a write operation and a HIGH selects a read operation on port B for a LOW-to-HIGH transition of
Read Select
CLKB. The B0-B35 outputs are in the high-impedance state when
W/RB is LOW.
相關PDF資料 |
PDF描述 |
|---|---|
| MS3101A20-27S | CONN RCPT 14POS FREE HNG W/SCKT |
| IDT72V3652L15PF8 | IC BI FIFO 4096X36 15NS 120QFP |
| IDT72V263L7-5PF8 | IC FIFO 8192X18 7-5NS 80QFP |
| IDT72V263L6PF8 | IC FIFO 8192X18 6NS 80QFP |
| ISL26710IRTZ | IC ADC 10BIT SAR 1MSPS 8-TDFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IDT72V3651L20PQF | 功能描述:IC SYNCFIFO 2048X36 20NS 132PQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3652L10PF | 功能描述:IC BI FIFO 4096X36 10NS 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3652L10PF8 | 功能描述:IC BI FIFO 4096X36 10NS 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3652L10PQF | 功能描述:IC BI FIFO 4096X36 10NS 132QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3652L15PF | 功能描述:IC BI FIFO 4096X36 15NS 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
發布緊急采購，3分鐘左右您將得到回復。