參數資料
型號： ISP1161A1
廠商： NXP Semiconductors N.V.
英文描述： Universal Serial Bus single-chip host and device controller
中文描述： 通用串行總線的單芯片主機和設備控制器
文件頁數： 18/127頁
文件大?。?/td> 2762K
代理商： ISP1161A1
Philips Semiconductors
ISP1161
Full-speed USB single-chip host and device controller
Product data
Rev. 01 — 3 July 2001
18 of 130
9397 750 08313
Philips Electronics N.V. 2001. All rights reserved.
microprocessor must still issue a RD or WR signal to ISP1161’s RD or WR pin.
(DACK Only mode does not need the RD or WR signal.) ISP1161 will repeat the DMA
cycles until it receives an EOT signal to terminate the DMA transfer.
ISP1161 supports both external EOT and internal EOT signals. The external EOT
signal is received as input from ISP1161’s EOT pin: it generally comes from the
external microprocessor. The internal EOT signal is generated by ISP1161 internally.
To select either, set the DMA configuration registers. For example, for the HC, setting
bit 2 of the HcDMAConfiguration register (21H - Read, A1H - Write) to 1 will enable
the DMA counter for DMA transfer. When the DMA counter reaches the value of
HcTransferCounter register, the internal EOT signal will be generated to terminate the
DMA transfer.
ISP1161 supports either single-cycle burst mode DMA operation or multiple-cycle
burst mode DMA operation.
In both figures, the DMA transfer is configured such that DREQ is active HIGH and
DACK is active LOW.
N = 1/2 byte count of transfer data.
Fig 18. DMA transfer for single-cycle burst mode.
MGT942
DREQ
DACK
D[15:0]
EOT
data #1
data #2
data #N
RD or WR
N = 1/2 byte count of transfer data, K = number of cycles/burst.
Fig 19. DMA transfer for multi-cycle burst mode.
MGT943
data #1
data #K
data #2K
data #N
data #(K
+
1)
data #(N
K
+
1)
DREQ
DACK
D[15:0]
EOT
RD or WR
相關PDF資料
PDF描述
ISP1161A1BD Universal Serial Bus single-chip host and device controller
ISP1161A1BM Universal Serial Bus single-chip host and device controller
ISP1161BD Full-speed Universal Serial Bus single-chip host and device controller
ISP1161BM Full-speed Universal Serial Bus single-chip host and device controller
ISP1181ABS INDUCTOR 1.0NH +-.3NH FIXED SMD
相關代理商/技術參數
參數描述
ISP1161A1BD 功能描述:IC USB HOST/DEVICE CTRLR 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161A1BD,118 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BD,151 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BD,157 功能描述:USB 接口集成電路 DO NOT USE ORDER -S OR -T PART RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BDFA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*