參數資料
型號: KFW1G16D2M-DEB5
廠商: SAMSUNG SEMICONDUCTOR CO. LTD.
英文描述: FLASH MEMORY(54MHz)
中文描述: 閃存(54MHz之間)
文件頁數: 96/125頁
文件大?。?/td> 1657K
代理商: KFW1G16D2M-DEB5
OneNAND1G(KFG1G16Q2M-DEB5)
FLASH MEMORY
96
OneNAND2G(KFH2G16Q2M-DEB5)
OneNAND4G(KFW4G16Q2M-DEB5)
The OneNAND device has on-chip ECC with the capability of detecting 2 bit errors and correcting 1-bit errors in the NAND Flash
Array memory main and spare areas.
As the device transfers data from a BufferRAM to the NAND Flash Array memory Page Buffer for Program Operation, the device ini-
tiates a background operation which generates an Error Correction Code (ECC) of 24bits for each sector main area data and 10bits
for 2nd and 3rd word data of each sector spare area.
During a Load operation from the NAND Flash Array memory Page, the on-chip ECC engine generates a new ECC. The 'Load ECC
result' is compared to the originally 'Program ECC' thus detecting the number and position of errors. Single-bit error is corrected.
ECC is updated by the device automatically. After a Load Operation, the Host can determine whether there was error by reading the
'ECC Status Register' (refer to section 2.8.26).
Error types are divided into 'no error', '1bit correctable error', and '2bit error uncorrectable error'.
OneNAND supports 2bit EDC even though 2bit error seldom or never occurs. Hence, it is not recommeded for Host to read 'ECC Sta-
tus Register' for checking ECC error because the built-in Error Correction Logic of OneNAND automatically corrects ECC error.
When the device reads the NAND Flash Array memory main and spare area data with an ECC operation, the device doesn't place
the newly generated ECC for main and spare area into the buffer. Instead it places the ECC which was generated and written during
the program operation into the buffer.
An ECC operation is also done during the Boot Loading operation.
3.13.1 ECC Bypass Operation
In an ECC bypass operation, the device does not generate ECC as a background operation. The result does not indicate error posi-
tion (refer to the ECC Result Table).
In a Program Operation the ECC code to NAND Flash Array memory spare area is not updated.
During a Load operation, the on-chip ECC engine does not generate a new ECC internally. Also the ECC Status & Result to Regis-
ters are invalid. The error is not corrected and detected by itself, so that ECC bypass operation is not recommended for host.
ECC bypass operation is set by the 9bit of System Configuration 1 Register (see section 2.8.19)
ECC Code and ECC Result by ECC Operation
NOTE:
1. Pre-written ECC code : ECC code which is previously written to NAND Flash Spare Area in program operation.
Operation
Program operation
Load operation
ECC Code Update to NAND
Flash Array Spare Area
ECC Code at BufferRAM Spare
Area
ECC Status & Result Update
to Registers
1bit Error
ECC operation
Update
Pre-written ECC code
(1)
loaded
Update
Correct
ECC bypass
Not update
Pre-written code
loaded
Invalid
Not correct
3.13 ECC Operation
相關PDF資料
PDF描述
KFW1G16D2M-DEB6 FLASH MEMORY(54MHz)
KFW1G16D2M-DED5 FLASH MEMORY(54MHz)
KFW1G16D2M-DED6 FLASH MEMORY(54MHz)
KFW1G16D2M-DIB5 FLASH MEMORY(54MHz)
KFW1G16D2M-DIB6 FLASH MEMORY(54MHz)
相關代理商/技術參數
參數描述
KFW1G16D2M-DEB6 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:FLASH MEMORY(54MHz)
KFW1G16D2M-DED5 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:FLASH MEMORY(54MHz)
KFW1G16D2M-DED6 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:FLASH MEMORY(54MHz)
KFW1G16D2M-DIB5 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:FLASH MEMORY(54MHz)
KFW1G16D2M-DIB6 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:FLASH MEMORY(54MHz)