參數資料
型號： KS8993FL
廠商： Micrel Inc
文件頁數： 35/99頁
文件大小： 0K
描述： IC CONV MED 10/100 SGL 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 管件
配用： 576-1012-ND - BOARD EVAL EXPERIMENT KS8993F
KS8993F
Micrel
August 26, 2004
Revision 1.0
- 40 -
1.
“Transmit all high priority packets before low priority packets”, i.e. a low priority packet could be transmitted
only when the high priority queue is empty;
2.
“Transmit high priority packets and low priority packets at 10:1 ratio”, i.e. transmit a low priority packet after
every 10 high priority packets are transmitted, if both queues are busy;
3.
“Transmit high priority packets and low priority packets at 5:1 ratio”;
4.
“Transmit high priority packets and low priority packets at 2:1 ratio”.
If a port's transmit queue is not split, both high priority packets and low priority packets have equal priority in the
transmit queue. Register 5 bits [3:2] are used to select the desired priority scheme. Optionally, the PRSEL1 and
PRSEL0 strap-in pins can be used.
Port based priority
With port based priority, each ingress port can be individually classified as a high priority receiving port. All packets
received at the high priority receiving port are marked as high priority, and will be sent to the high priority transmit
queue if the corresponding transmit queue is split. Bit 4 of registers 16, 32 and 48 is used to enable port based priority
for ports 1, 2 and 3, respectively. Optionally, the Px_PP strap-in pins can be used to enable this feature.
802.1p based priority
For 802.1p based priority, the KS8993F will examine the ingress (incoming) packets to determine whether they are
tagged. If tagged, the 3-bits priority field in the VLAN tag is retrieved and compared against the “priority base” value,
specified by register 2 bits [6:4]. The “priority base” value is programmable; its default value is 0x4.
The following figure illustrates how the 802.1p priority field is embedded in the 802.1Q VLAN tag.
Figure 6: 802.1p Priority Field Format
Preamble
DA
TCI
86
6
2
length
LLC
Data
FCS
2
46-1500
4
1
Tagged Packet Type
(8100 for Ethernet)
802.1p
CF
I
VLAN ID
Bytes
Bits
16
3
12
802.1q VLAN Tag
2
SA
VPID
If an ingress packet has an equal or higher priority value than the "priority base" value, the packet will be placed in the
high priority transmit queue if the corresponding transmit queue is split. 802.1p based priority is enabled by bit 5 of
registers 16, 32 and 48 for ports 1, 2 and 3, respectively. Optionally, the Px_1PEN strap-in pins can be used to enable
this feature.
The KS8993F provides the option to insert or remove the priority tagged frame's header at each individual egress port.
This header, consisting of the 2 bytes VLAN Protocol ID (VPID) and the 2 bytes Tag Control Information field (TCI), is
also refer to as the 802.1Q VLAN Tag.
Tag insertion is enabled by bit 2 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively.
Optionally, the
Px_TAGINS strap-in pins can be used to enable this feature. At the egress port, untagged packets are tagged with
相關PDF資料
PDF描述
KS8993I IC SWITCH 10/100 3PORT 128PQFP
KS8993ML IC SWITCH 10/100 3PORT 128PQFP
KS8995MAI IC SWITCH 10/100 5PORT 128PQFP
KS8995MI IC SWITCH 10/100 5PORT 128PQFP
KS8995XA IC SWITCH 10/100 5PORT 128PQFP
相關代理商/技術參數
參數描述
KS8993FL-EVAL 功能描述:BOARD EVAL EXPERIMENT KS8993F RoHS:否 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 主要目的:電源管理，電池充電器 嵌入式:否 已用 IC / 零件:MAX8903A 主要屬性:1 芯鋰離子電池 次要屬性:狀態 LED 已供物品:板
KS8993I 功能描述:IC SWITCH 10/100 3PORT 128PQFP RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KS8993M 功能描述:IC SWITCH 10/100 3PORT 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KS8993M_11 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:Integrated 3-Port 10/100 Managed Switch with PHYs
KS8993MA5 功能描述:IC SWITCH 3-PORT 10/100 128-PQFP RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*