參數資料
型號: KSZ8995FQ
廠商: Micrel Inc
文件頁數: 46/89頁
文件大?。?/td> 0K
描述: IC SWITCH 10/100 5PORT 128-PQFP
標準包裝: 66
系列: *
產品目錄頁面: 1081 (CN2011-ZH PDF)
配用: 576-3872-ND - BOARD EVALUATION FOR KSZ8995FQ
其它名稱: 576-3077
Micrel, Inc.
KS8995MA/FQ
October 2011
50
M9999-102611-3.0
Global Registers (Continued)
Address
Name
Description
Mode
Default
Register 4 (0x04): Global Control 2
1
Legal Maximum Packet
Size Check Disable
1, will accept packet sizes up to 1536 bytes (inclusive).
0, 1522 bytes for tagged packets (not including packets with
STPID from CPU to ports 1-4), 1518 bytes for untagged
packets. Any packets larger than the specified value will be
dropped.
R/W
Pin PMRXER strap
option. Pull-down
(0): 1518/1522 byte
packets. Pull-up (1):
1536 byte packets.
Note: PMRXER has
internal pull-down.
0
Priority Buffer Reserve
1, each output queue is pre-allocated 48 buffers, used
exclusively for high priority packets. It is recommended to
enable this when priority queue feature is turned on.
0, no reserved buffers for high priority packets.
R/W
0
Address
Name
Description
Mode
Default
Register 5 (0x05): Global Control 3
7
802.1q VLAN Enable
1, 802.1q VLAN mode is turned on. VLAN table needs to set up
before the operation.
0, 802.1q VLAN is disabled.
R/W
0
6
IGMP Snoop Enable on
Switch MII Interface
1, IGMP snoop enabled. All the IGMP packets will be forwarded
to Switch MII port.
0, IGMP snoop disabled.
R/W
0
5
Enable Direct Mode on
Switch MII Interface
1, direct mode on port 5. This is a special mode for the
Switch MII interface. Using preamble before MRXDV to direct
switch to forward packets, bypassing internal look-up.
0, normal operation.
R/W
0
4
Enable Pre-Tag on
Switch MII Interface
1, packets forwarded to Switch MII interface will be
pre-tagged with the source port number (preamble
before MRXDV).
0, normal operation.
R/W
0
3
2
Priority Scheme Select
00 = always deliver high priority packets first.
01 = deliver high/low packets at ratio 10/1.
10 = deliver high/low packets at ratio 5/1.
11 = deliver high/low packets at ratio 2/1.
R/W
00
1
Enable “Tag” Mask
1, the last 5 digits in the VID field are used as a mask to
determine which port(s) the packet should be forwarded to.
0, no tag masks.
R/W
0
Sniff Mode Select
1, will do Rx AND Tx sniff (both source port and destination port
need to match).
0, will do Rx OR Tx sniff (Either source port or destination port
needs to match).
This is the mode used to implement Rx only sniff.
R/W
0
相關PDF資料
PDF描述
KSZ8995MA IC SWITCH 10/100 5PORT 128PQFP
KSZ8995MI IC SWITCH 5-PORT 10/100 128PQFP
KSZ9021GN TR TXRX ETHERNET GB GMII/MII 64MLF
KSZ9021GQI TXRX GIG ETH GMII/MII 128-PQFP
KSZ9021RL IC TXRX 10/100/1000 SGL 64LQFP
相關代理商/技術參數
參數描述
KSZ8995FQ-EVAL 功能描述:以太網開發(fā)工具 Integrated 5-Port Switch with Fiber on Port 3 & 4 Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
KSZ8995FQI 功能描述:以太網 IC 5 Port 10/100 Switch with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發(fā)器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8995M 功能描述:以太網 IC 5 Port 10/100 Switch with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發(fā)器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8995MA 功能描述:以太網 IC 5 Port 10/100 Switch with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發(fā)器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8995MA4 功能描述:IC SWITCH 5-PORT 10/100 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA(27x27) 包裝:散裝