2.3 W 2-Channel AF Power Amplifier
Features
.
Built-in 2 channels enabling use in stereo and bridge
amplifier applications.
.
High output: 2.3 W/channel, VCC =9 V, RL =4 , and
4.7 W/bridge, RL =8 .
.
Minimum number of external parts required : 9 pcs. min.
(Stereo/bridge).
.
Small pop noise at the time of power supply ON/OFF due to
built-in muting circuit.
.
Good ripple rejection ratio due to built-in ripple filter.
.
Soft tone at the time of output saturation.
.
Good channel separation.
.
Voltage gain fixed at 45 dB (Bridge: 51 dB). Variable
voltage gain available with external resistor added.
.
Easy to design radiator fin.
Package Dimensions
unit : mm
3022A-DIP12F
[LA4182]
1
6
12
7
3.46
3.5
4.26max
0.51min
19.4
0.81
2.54
5.12
1.3
3.6
0.5
0.4
7.62
6.45
SANYO : DIP12F
Note) In general applications, heat generated in this package
can be radiated through the Cu-foiled area of the printed
circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load
conditions, it is recommended to use a fin additionally.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
With signal
11
V
Quiescent
15
V
Allowable power dissipation
Pd max
With printed circuit board
(Refer to Pd-Ta characteristics)
4W
Operating temperature
Topr
–20 to +75
°C
Storage temperature
Tstg
–55 to +150
°C
Ordering number: EN742G
Monolithic Linear IC
LA4182
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41596HA(II)/O207KI/2146KI/4025KI/O291KI,TS No.742-1/10