Digital Interface Electrical Characteristics
Unless otherwise specified, all limits are guaranteed for T
J = 25°C, 1.6V < VDD < 3.6V, VIN = 18 mVPP, 800kHz < fCLK < 2.4 MHz,
Duty Cycle = 50% and 100nF capacitor between V
REF and GND.
Symbol
Parameter
Conditions
Typical
Limits
Units (min/
max)
V
LOW
CLOCK Logic Low Level
0.1*V
DD
V (max)
V
HIGH
CLOCK Logic High Level
0.9*V
DD
V (min
V
OL
DATA Output Logic Low Level
I
SINK = 0.5mA
0.1
V (min)
V
OH
DATA Output Logic High Level
I
SOURCE = 0.5mA
V
DD-0.1V
V (max
t
HZ
Time from CLOCK Transition to DATA
Becoming High Impedance (See also
LMV1022: On Rising Edge of the CLOCK
65
ns
LMV1023: On Falling Edge of the CLOCK
t
DV
Time from CLOCK Transition to DATA
Application Section)
LMV1022: On Falling Edge of the CLOCK
90
ns
LMV1023: On Rising Edge of the CLOCK
Note 1:
“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the
device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified
Note 2:
The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as otherwise modified
or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.
Note 3:
The maximum power dissipation must be derated at elevated temperatures and is dictated by T
JMAX, θJA, and the ambient temperature, TA. The maximum
allowable power dissipation is P
DMAX = (TJMAX - TA) / θJA or the number given in Absolute Maximum Ratings, whichever is lower. For the LMV1022, LM1023 see
power derating curves for additional information.
Note 4:
Human body model, applicable std. JESD22-A114C.
Note 5:
Machine model, applicable std. JESD22-A115-A.
Note 6:
Typical values represent most likely parametric norms at T
A = +25°C, and at the Recommended Operation Conditions at the time of product
characterization and are not guaranteed.
Note 7:
Datasheet min/max specification limits are guaranteed by test or statistical analysis.
Note 8:
The Supply Current depends on the applied Clock Frequency and the load on the DATA output.
Note 9:
Quantization Noise level of the modulator (verified by simulation)
Note 10:
Calculated for Typical microphone as described in the Application section
Digital Microphone5
www.national.com
202124 Version 2 Revision 1
Print Date/Time: 2011/07/08 14:36:52
LMV1022/LMV1023