- 您現在的位置：買賣IC網 > PDF目錄377738 > LTC1279C (Linear Technology Corporation) 12-Bit, 600ksps Sampling A/D Converter with Shutdown PDF資料下載
參數資料
| 型號： | LTC1279C |
| 廠商： | Linear Technology Corporation |
| 英文描述： | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| 中文描述： | 12位，600ksps與關機采樣A / D轉換器 |
| 文件頁數： | 10/16頁 |
| 文件大小： | 327K |
| 代理商： | LTC1279C |
10
LTC1279
APPLICATIO
S I
FOR
ATIO
U
THD = 20log
√
V
22
+ V
32
+ V
42
... + V
N2
W
U
U
V
1
where V
1
is the RMS amplitude of the fundamental fre-
quency and V
2
through V
N
are the amplitudes of the
second through Nth harmonics. THD versus input fre-
quency is shown in Figure 4. The LTC1279 has good
distortion performance up to the Nyquist frequency and
beyond.
Intermodulation Distortion
If the ADC input signal consists of more than one spectral
component, the ADC transfer function nonlinearity can
produce intermodulation distortion (IMD) in addition to
THD. IMD is the change in one sinusoidal input caused by
the presence of another sinusoidal input at a different
frequency.
If two pure sine waves of frequencies fa and fb are applied
to the ADC input, nonlinearities in the ADC transfer func-
tion can create distortion products at sum and difference
frequencies of mfa
±
nfb, where m and n = 0, 1, 2, 3, etc.
For example, the 2nd order IMD terms include (fa + fb) and
(fa – fb) while the 3rd order IMD terms include (2fa + fb),
(2fa – fb), (fa + 2fb), and (fa – 2fb). If the two input sine
waves are equal in magnitude, the value (in decibels) of
the 2nd order IMD products can be expressed by the
following formula:
IMD (fa ± fb) = 20logAmplitude at (fa ± fb)
Amplitude at fa
INPUT FREQUENCY (Hz)
10k
A
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
100k
1M
1279 G06
2M
THD
2ND HARMONIC
3RD HARMONIC
f
SAMPLE
= 600kHz
Figure 4. Distortion vs Input Frequency
Figure 5 shows the IMD performance at a 100kHz input.
Figure 5. Intermodulation Distortion Plot
Peak Harmonic or Spurious Noise
The peak harmonic or spurious noise is the largest spec-
tral component excluding the input signal and DC. This
value is expressed in decibels relative to the RMS value of
a full scale input signal.
Full Power and Full Linear Bandwidth
The full power bandwidth is that input frequency at which
the amplitude of the reconstructed fundamental is re-
duced by 3dB for a full scale input signal.
The full linear bandwidth is the input frequency at which
the S/(N + D) has dropped to 68dB (11 effective bits). The
LTC1279 has been designed to optimize input bandwidth,
allowing ADC to undersample input signals with frequen-
cies above the converter’s Nyquist Frequency. The noise
floor stays very low at high frequencies; S/(N + D) be-
comes dominated by distortion at frequencies far beyond
Nyquist.
Driving the Analog Input
The LTC1279’s analog input is easy to drive. It draws only
one small current spike while charging the sample-and-
hold capacitor at the end of conversion. During conversion
the analog input draws no current. The only requirement
is that the amplifier driving the analog input must settle
after the small current spike before the next conversion
starts. Any op amp that settles in 160ns to small current
transients will allow maximum speed operation. If slower
FREQUENCY (kHz)
0
A
50
100
150
200
1279 G08
250
300
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
f
= 600kHz
fa = 94.189kHz
fb = 97.705kHz
(fb – fa)
(2fa – fb)
(2fa)
(2fb)
(3fa)
(2fb – fa)
(fa) (fb)
(fa + fb)(2fa + fb)
(fa + 2fb)
(3fb)
相關PDF資料 |
PDF描述 |
|---|---|
| LTC1279ISW | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| LTC1279CSW | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| LTC1279I | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| LTC1279 | 12-Bit, 600ksps，Sampling A/D Converters with Shutdown(600ksps，12位采樣A/D轉換器（帶關斷）) |
| LTC1282AC | 3V 140ksps 12-Bit Sampling A/D Converter with Reference |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1279CG | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| LTC1279CG#PBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| LTC1279CG#TR | 功能描述:IC ADC 12BIT SAMPL SHTDWN 24SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1279CG#TRPBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| LTC1279CSW | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
發布緊急采購，3分鐘左右您將得到回復。