- 您現在的位置：買賣IC網 > PDF目錄1933 > LTC1283ACN#PBF (Linear Technology)IC DATA ACQ SYS 10BIT 3V 20-DIP PDF資料下載
參數資料
| 型號： | LTC1283ACN#PBF |
| 廠商： | Linear Technology |
| 文件頁數： | 3/24頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC DATA ACQ SYS 10BIT 3V 20-DIP |
| 標準包裝： | 18 |
| 類型： | 數據采集系統（DAS） |
| 分辨率（位）： | 10 b |
| 采樣率（每秒）： | 15k |
| 數據接口： | 串行，并聯 |
| 電壓電源： | 雙 ± |
| 電源電壓： | ±3.3V，3 V ~ 3.6 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 20-DIP（0.300"，7.62mm） |
| 供應商設備封裝： | 20-PDIP |
| 包裝： | 管件 |
11
LTC1283
1283fb
1 ACLK cycle. After a change of state on the CS input, the
LTC1283 waits for two falling edges of the ACLK before
recognizing a valid chip select. One indication of CS low
recognition is the DOUT line becoming active (leaving the
Hi-Z state). Note that the deglitching applies to both the
rising and falling CS edges.
MSB-First/LSB-First Format (MSBF)
The output data of the LTC1283 is programmed for MSB-
first or LSB-first sequence using the MSBF bit. For MSB-
first output data the input word clocked to the LTC1283
should always contain a logical one in the sixth bit location
(MSBF bit). Likewise for LSB-first output data, the input
word clocked to the LTC1283 should always contain a zero
in the MSBF bit location. The MSBF bit in a given DIN word
will control the order of the next DOUT word. The MSBF bit
affects only the order of the output data word. The order
of the input word is unaffected by this bit.
U
S
A
O
PPLICATI
WU
U
I FOR ATIO
MSBF
0
1
OUTPUT FORMAT
LSB-First
MSB-First
LTC1283 AI08
Figure 2 shows how the data output (DOUT) timing can be
controlled with word length selection and MSB/LSB-first
format selection.
3. Deglitcher
A deglitching circuit has been added to the chip select
input of the LTC1283 to minimize the effects of errors
caused by noise on that input. This circuit ignores changes
in state on the CS input that are shorter in duration than
4. CS Low During Conversion
In the normal mode of operation, CS is brought high
during the conversion time (see Figure 3). The serial port
ignores any SCLK activity while CS is high. The LTC1283
will also operate with CS low during the conversion. In this
mode, SCLK must remain low during the conversion as
shown in Figure 4. After the conversion is complete, the
DOUT line will become active with the first output bit. Then
the data transfer can begin as normal.
5. Microprocessor Interfaces
The LTC1283 can interface directly (without external hard-
ware) to most popular microprocessor (MPU) synchro-
nous serial formats (see Table 2). If an MPU without a
serial interface is used, then four of the MPU’s parallel port
lines can be programmed to form the serial link to the
LTC1283. Included here are three serial interface ex-
amples and one example showing a parallel port pro-
grammed to form the serial interface.
Word Length (WL1, WL0)
The last two bits of the input word (WL1 and WL0)
program the output data word length of the LTC1283.
Word lengths of 8-, 10-, 12- or 16-bit can be selected
according to the following table. The WL1 and WL0 bits in
a given DIN word control the length of the present, not the
next, DOUT word. WL1 and WL2 are never “don’t cares”
and must be set for the correct DOUT word length even
when a “dummy” DIN word is sent. On any transfer cycle,
the word length should be made equal to the number of
SCLK cycles sent by the MPU.
WL1
0
1
OUTPUT WORD LENGTH
8 Bits
10 Bits
12 Bits
16 Bits
LTC1283 AI09
WL0
0
1
0
1
CS
ACLK
DOUT
HI-Z
VALID OUTPUT
CS
ACLK
DOUT
VALID OUTPUT
LTC1283 AI10
HI-Z
LOW CS RECOGINZED INTERNALLY
HIGH CS RECOGNIZED INTERNALLY
相關PDF資料 |
PDF描述 |
|---|---|
| LTC1287BCN8#PBF | IC DATA ACQ SYS 12BIT 3V 8-DIP |
| LTC1289CCN#PBF | IC DATA ACQ SYS 12BIT 3V 20-DIP |
| LTC1290BISW#TRPBF | IC DATA ACQ SYS 12BIT 20-SOIC |
| LTC1291CCN8 | IC DATA ACQ SYSTEM 12BIT 8-DIP |
| LTC1296CISW#PBF | IC DATA ACQ SYSTEM 12BIT 20-SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1283CN | 功能描述:IC DATA ACQ SYS 10BIT 3V 20-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| LTC1283CN#PBF | 功能描述:IC DATA ACQ SYS 10BIT 3V 20-DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| LTC1285CN8 | 功能描述:IC A/D CONV SAMPLING 12BIT 8-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
| LTC1285CN8#PBF | 功能描述:IC A/D CONV SAMPLING 12BIT 8-DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
| LTC1285CN8PBF | 制造商:Linear Technology 功能描述:LTC1285CN8PBF |
發布緊急采購，3分鐘左右您將得到回復。