- 您現在的位置：買賣IC網 > PDF目錄2003 > LTC1408IUH-12#TRPBF (Linear Technology)IC ADC 12BIT 600KSPS 32-QFN PDF資料下載
參數資料
| 型號： | LTC1408IUH-12#TRPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 19/20頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC ADC 12BIT 600KSPS 32-QFN |
| 標準包裝： | 2,500 |
| 位數： | 12 |
| 采樣率（每秒）： | 600k |
| 數據接口： | 串行 |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 15mW |
| 電壓電源： | 模擬和數字 |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 32-WFQFN 裸露焊盤 |
| 供應商設備封裝： | 32-QFN 裸露焊盤（5x5） |
| 包裝： | 帶卷 (TR) |
| 輸入數目和類型： | 12 個單端，單極；12 個單端，雙極；6 個差分，單極；6 個差分，雙極 |
| 配用： | DC887A-ND - BOARD SAR ADC LTC1408 |
8
LTC1408-12
140812f
VDD (Pin 25): 3V Positive Digital Supply. This pin supplies
3V to the logic section. Bypass to DGND pin and solid
analog ground plane with a 10
F ceramic capacitor (or
10
F tantalum in parallel with 0.1F ceramic). Keep in
mind that internal digital output signal currents flow
through this pin. Care should be taken to place the 0.1
F
bypass capacitor as close to Pin 25 as possible. Pin 25
must be tied to Pin 24.
SEL2 (Pin 26): Most significant bit controlling the
number of channels being converted. In combination with
SEL1 and SEL0, 000 selects just the first channel (CH0) for
conversion. Incrementing SELx selects additional
channels(CH0–CH5) for conversion. 101, 110 or 111
select all 6 channels for conversion. Must be kept in a fixed
state during conversion and during the subsequent con-
version to read data.
SEL1 (Pin 27): Middle significance bit controlling the
number of channels being converted. In combination with
SEL0 and SEL2, 000 selects just the first channel (CH0) for
conversion. Incrementing SELx selects additional
channels for conversion. 101, 110 or 111 select all 6
channels (CH0–CH5) for conversion. Must be kept in a
fixed state during conversion and during the subsequent
conversion to read data.
SEL0 (Pin 28): Least significant bit controlling the
number of channels being converted. In combination with
SEL1 and SEL2, 000 selects just the first channel (CH0) for
conversion. Incrementing SELx selects additional
channels for conversion. 101, 110 or 111 select all 6
channels (CH0–CH5) for conversion. Must be kept in a
fixed state during conversion and during the subsequent
conversion to read data.
UU
U
PI FU CTIO S
BIP (Pin 29): Bipolar/Unipolar Mode. The input differen-
tial range is 0V – 2.5V when BIP is LOW, and it is
±1.25V
when BIP is HIGH. Must be kept in fixed state during
conversion and during subsequent conversion to read
data. When changing BIP between conversions the full
acquisition time must be allowed before starting the next
conversion. The output data is in 2’s complement
format for bipolar mode and straight binary format for
unipolar mode.
CONV (Pin 30): Convert Start. Holds the six analog input
signals and starts the conversion on CONV’s rising edge.
Two CONV pulses with SCK in fixed high or fixed low state
starts Nap mode. Four or more CONV pulses with SCK in
fixed high or fixed low state starts Sleep mode.
DGND (Pin 31): Digital Ground. This ground pin must be
tied directly to the solid ground plane. Digital input signal
currents flow through this pin.
SCK (Pin 32): External Clock Input. Advances the conver-
sion process and sequences the output data at SD0 (Pin1)
on the rising edge. One or more SCK pulses wake from
sleep or nap power saving modes. 16 clock cycles are
needed for each of the channels that are activated by SELx
(Pins 26, 27, 28), up to a total of 96 clock cycles needed
to convert and read out all 6 channels.
EXPOSED PAD (Pin 33): GND. Must be tied directly to the
solid ground plane.
相關PDF資料 |
PDF描述 |
|---|---|
| LTC1408IUH#TRPBF | IC ADC 14BIT 600KSPS 32-QFN |
| LTC1409IG#TR | IC ADC 12BIT 800KSPS SMPL 28SSOP |
| LTC1410IG#TR | IC ADC 12BIT 1.25MSPS SMP 28SSOP |
| LTC1411IG#TRPBF | IC A/D CONV 14BIT 2.5MSPS 36SSOP |
| LTC1412IG#TR | IC ADC 12BIT 3MSPS SAMPLE 28SSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1409CG | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1409CG#PBF | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1409CG#TR | 功能描述:IC ADC 12BIT 800KSPS SMPL 28SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1409CG#TRPBF | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1409CSW | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
發布緊急采購，3分鐘左右您將得到回復。