- 您現在的位置：買賣IC網 > PDF目錄359029 > M29F200T-120M6R (意法半導體) 2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory PDF資料下載
參數資料
| 型號： | M29F200T-120M6R |
| 廠商： | 意法半導體 |
| 英文描述： | 2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory |
| 中文描述： | 2兆位的256Kb x8或128KB的x16插槽，啟動座單電源閃存 |
| 文件頁數： | 11/22頁 |
| 文件大?。?/td> | 146K |
| 代理商： | M29F200T-120M6R |
11/22
M29F200BT, M29F200BB
Figure 3. Data Polling Flowchart
READ DQ5 &
DQ7
at VALID ADDRESS
START
READ DQ7
FAIL
PASS
AI01369
DQ7
DATA
YES
NO
YES
NO
DQ5
= 1
DQ7
DATA
YES
NO
Figure 4. Data Toggle Flowchart
READ
DQ5 & DQ6
START
READ DQ6
FAIL
PASS
AI01370
DQ6
TOGGLE
NO
NO
YES
YES
DQ5
= 1
NO
YES
DQ6
TOGGLE
Erase Timer Bit (DQ3).
The Erase Timer Bit can
be used to identify the start of Program/Erase
Controller operation during a Block Erase com-
mand. Once the Program/Erase Controller starts
erasing the Erase Timer Bit is set to ’1’. Before the
Program/Erase Controller starts the Erase Timer
Bit is set to ’0’ and additional blocks to be erased
may be written to the Command Interface. The
Erase Timer Bit is output on DQ3 when the Status
Register is read.
Alternative Toggle Bit (DQ2).
The
Toggle Bit can be used to monitor the Program/
Erase controller during Erase operations. The Al-
ternative Toggle Bit is output on DQ2 when the
Status Register is read.
During Chip Erase and Block Eraseoperations the
Toggle Bit changes from ’0’ to ’1’ to ’0’, etc., with
successive Bus Read operations from addresses
Alternative
within theblocks being erased. Once the operation
completes the memory returns to Read mode.
During Erase Suspend the Alternative Toggle Bit
changes from ’0’ to ’1’ to ’0’, etc. with successive
Bus Read operations from addresses within the
blocks being erased. Bus Read operations to ad-
dresses within blocks not being erased will output
the memory cell data as if in Read mode.
After an Erase operation that causes the Error Bit
to be set the Alternative Toggle Bit can be used to
identify which block or blocks have caused the er-
ror. The Alternative Toggle Bit changes from ’0’ to
’1’ to ’0’, etc. with successive Bus Read Opera-
tions from addresses within blocks that have not
erased correctly. The Alternative Toggle Bit does
not change if the addressed block has erased cor-
rectly.
相關PDF資料 |
PDF描述 |
|---|---|
| M29F200T-120M3TR | 2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory |
| M29F200T | 2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory |
| M29F200BT90N6T | 2 Mbit 256Kb x8 or 128Kb x16, Boot Block Single Supply Flash Memory |
| M29F200BT45M6T | Single Bus Buffer Gate With 3-State Output 5-SC70 -40 to 85 |
| M29F200BT45M3T | Single Bus Buffer Gate With 3-State Output 5-SOT-23 -40 to 85 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| M29F200T-70XM1 | 功能描述:電可擦除可編程只讀存儲器 256Kx8 or 128Kx16 70 RoHS:否 制造商:Atmel 存儲容量:2 Kbit 組織:256 B x 8 數據保留:100 yr 最大時鐘頻率:1000 KHz 最大工作電流:6 uA 工作電源電壓:1.7 V to 5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 |
| M29F200T-70XN1 | 功能描述:閃存 256Kx8 or 128Kx16 70 RoHS:否 制造商:ON Semiconductor 數據總線寬度:1 bit 存儲類型:Flash 存儲容量:2 MB 結構:256 K x 8 定時類型: 接口類型:SPI 訪問時間: 電源電壓-最大:3.6 V 電源電壓-最小:2.3 V 最大工作電流:15 mA 工作溫度:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel |
| M29F200T-90M1 | 功能描述:電可擦除可編程只讀存儲器 256Kx8 or 128Kx16 90 RoHS:否 制造商:Atmel 存儲容量:2 Kbit 組織:256 B x 8 數據保留:100 yr 最大時鐘頻率:1000 KHz 最大工作電流:6 uA 工作電源電壓:1.7 V to 5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 |
| M29F200T-90N1 | 功能描述:閃存 RO 511-M29F200BT70N 256KX8 OR 128KX16 90 RoHS:否 制造商:ON Semiconductor 數據總線寬度:1 bit 存儲類型:Flash 存儲容量:2 MB 結構:256 K x 8 定時類型: 接口類型:SPI 訪問時間: 電源電壓-最大:3.6 V 電源電壓-最小:2.3 V 最大工作電流:15 mA 工作溫度:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel |
| M29F400B-90N1 | 功能描述:閃存 512Kx8 or 256Kx16 90 RoHS:否 制造商:ON Semiconductor 數據總線寬度:1 bit 存儲類型:Flash 存儲容量:2 MB 結構:256 K x 8 定時類型: 接口類型:SPI 訪問時間: 電源電壓-最大:3.6 V 電源電壓-最小:2.3 V 最大工作電流:15 mA 工作溫度:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。