參數資料
型號： M34250M2-116FP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
中文描述： 單芯片4位微機的CMOS
文件頁數： 23/58頁
文件大?。?/td> 331K
代理商： M34250M2-116FP
MITSUBISHI
ELECTRIC
23
MITSUBISHI MICROCOMPUTERS
4250 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
(5) Timer output pin (G
1
/T
OUT
)
Timer output pin (G
1
/T
OUT
) has the function to output the timer
1 underflow signal divided by 2. The selection of G
1
/T
OUT
pin
function can be controlled with the bit 3 of register V1.
(6) Timer interrupt request flag (T1F)
Timer interrupt request flag is set to “1” when the timer
underflows. The state of this flag can be examined with the
skip instruction (SNZ1).
Use the register V1 to select an interrupt or a skip instruction.
T1F flag is cleared to “0” when an interrupt occurs or when the
next instruction is skipped with a skip instruction.
(1) Control registers related to timer
Timer control register V1
G
1
/T
OUT
pin function selection bit and prescaler/timer 1
operation start bit are assigned to register V1. Set the
contents of this register through register A with the TV1A
instruction. The TAV1 instruction can be used to transfer
the contents of register V1 to register A.
Key-on wakeup control register K0
Prescaler dividing ratio selection bit is assigned to register
K0. Set the contents of this register through register A with
the TK0A instruction. The TAK0 instruction can be used to
transfer the contents of register K0 to register A.
(2) Precautions
Note the following for the use of timers.
Prescaler
Stop the prescaler operation to change its frequency dividing
ratio.
Reading the count value
Stop timer 1 counting and then execute the TAB1 instruction
to read its data.
(3) Prescaler
Prescaler is a frequency divider. Its frequency dividing ratio
can be selected. The count source of prescaler is the
instruction clock.
Use the bit 3 of register K0 to select the prescaler dividing
ratio and the bit 2 of register V1 to start and stop its operation.
Prescaler is initialized, and the output signal (ORCLK) stops
when the bit 2 of register V1 is cleared to “0.”
(4) Timer 1 (interrupt function)
Timer 1 is an 8-bit binary down counter with the timer 1 reload
register (R1). Data can be set simultaneously in timer 1 and
the reload register (R1) with the T1AB instruction.
Timer 1 starts counting after the following process;
set data in timer 1, and
set the bit 2 of register V1 to “1.”
Once count is started, when timer 1 underflows (the next count
pulse is input after the contents of timer 1 becomes “0”), the
timer 1 interrupt request flag (T1F) is set to “1,” new data is
loaded from reload register R1, and count continues (auto-
reload function).
When a value set in reload register R1 is n, timer 1 divides the
count source signal by n + 1 (n = 0 to 255).
Data can be read from timer 1 to registers A and B with the
TAB1 instruction. When reading the data, stop the counter
and then execute the TAB1 instruction. Timer 1 underflow
signal divided by 2 can be output from G
1
/T
OUT
pin.
相關PDF資料
PDF描述
M34250 Single Chip 4 Bits CMOS Microcomputer(4位單片機)
M34250E2FP SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34250M2 SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34282M2-064GP Aluminum Electrolytic Capacitor; Capacitor Type:Computer Grade; Voltage Rating:75VDC; Capacitor Dielectric Material:Aluminum Electrolytic; Operating Temperature Range:-40 C to C; Capacitance:68000uF RoHS Compliant: Yes
M34282M1 SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M34250M2-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M3426 SL002 制造商:Alpha Wire 功能描述:CBL 8PR 24AWG SLT 500'
M3426 SL005 制造商:Alpha Wire 功能描述:CBL 8PR 24AWG SLT 100'
M3427-SLATE-500 制造商:Alpha Wire 功能描述:
M3428 SL001 制造商:Alpha Wire 功能描述:CBL 12PR 24AWG SLT 1000'
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*