參數資料
型號： M37544G2GP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP32
封裝： 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件頁數： 61/70頁
文件大小： 645K
代理商： M37544G2GP
7544 Group
Rev.1.04
2004.06.08
page 62 of 66
REJ03B0012-0104Z
Notes on Timers
1. When n (0 to 255) is written to a timer latch, the frequency divi-
sion ratio is 1/(n+1).
2. When a count source of timer X is switched, stop a count of the
timer.
Notes on Timer 1
1. Timer 1 count source
The “on-chip oscillator output” of timer 1 count source selection
bits (bits 1 and 0 of timer count source set register 2 (address
2F16)) can be selected while the on-chip oscillator oscillation con-
trol bit (bit 3 of CPU mode register (address 3B16)) is “0” (on-chip
oscillator oscillation enabled).
Notes on Timer A
1. CNTR1 interrupt active edge selection
CNTR1 interrupt active edge depends on the CNTR1 active edge
switch bit (bit 6 of timer A mode register (address 1D16)).
When this bit is “0”, the CNTR1 interrupt request bit goes to “1” at
the falling edge of the CNTR1 pin input signal. When this bit is “1”,
the CNTR1 interrupt request bit goes to “1” at the rising edge of
the CNTR1 pin input signal.
However, in the pulse width HL continuously measurement mode,
CNTR1 interrupt request is generated at both rising and falling
edges of CNTR1 pin input signal regardless of the setting of
CNTR1 active edge switch bit.
2. Period measurement mode, event counter mode and pulse
width HL continuously measurement mode
Set the direction register of port P00, which is also used as CNTR1
pin, to input.
Set the key-on wakeup function of P00, which is also used as
CNTR1 pin, to be disabled by setting the P00 key-on wakeup se-
lection bit (bit 7 of interrupt edge selection register (address 3A16))
to “1”.
3. Timer A count source
The “on-chip oscillator output” of timer A count source selection
bits (bits 3 and 2 of timer count source set register 2 (address
2F16)) can be selected while the on-chip oscillator oscillation con-
trol bit (bit 3 of CPU mode register (address 3B16)) is “0” (on-chip
oscillator oscillation enabled).
Notes on Timer X
1. CNTR0 interrupt active edge selection
CNTR0 interrupt active edge depends on the CNTR0 active edge
switch bit (bit 2 of timer X mode register (address 2B16)).
When this bit is “0”, the CNTR0 interrupt request bit goes to “1” at
the falling edge of CNTR0 pin input signal. When this bit is “1”, the
CNTR0 interrupt request bit goes to “1” at the rising edge of
CNTR0 pin input signal.
2. Timer X count source selection
The f(XIN) (frequency not divided) can be selected by the timer X
count source selection bits (bits 1 and 0 of timer count source set
register 1 (address 2E16)) only when the ceramic oscillation or the
on-chip oscillator is selected.
Do not select it for the timer X count source at the RC oscillation.
3. Pulse output mode
Set the direction register of port P14, which is also used as CNTR0
pin, to output.
When the TXOUT pin is used, set the direction register of port P03,
which is also used as TXOUT pin, to output.
4. Pulse width measurement mode
Set the direction register of port P14, which is also used as CNTR0
pin, to input.
相關PDF資料
PDF描述
M37544G2SP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP32
M37545G2KP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDSO32
M37545G8-XXXGP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP32
M37545GC-XXXGP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP32
M37545G1KP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDSO32
相關代理商/技術參數
參數描述
M37544G2HP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37544G2SP 功能描述:IC 740 MCU OTP 8K 32P4B RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 標準包裝:330 系列:- 核心處理器:- 芯體尺寸:8/16-位 速度:40MHz 連通性:UART/USART 外圍設備:DMA，PWM，WDT 輸入/輸出數:32 程序存儲器容量:- 程序存儲器類型:外部程序存儲器 EEPROM 大小:- RAM 容量:- 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:100-BQFP 包裝:管件
M37544M2-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37544M2-XXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37544M2-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*