參數資料
型號: M38257E8FS
元件分類: 微控制器/微處理器
英文描述: 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CQCC100
封裝: 0.65 MM PITCH, GLASS SEALED, CERAMIC, LCC-100
文件頁數: 3/70頁
文件大小: 994K
代理商: M38257E8FS
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
3825 Group
11
FUNCTIONAL DESCRIPTION
CENTRAL PROCESSING UNIT (CPU)
The 3825 group uses the standard 740 family instruction set. Re-
fer to the table of 740 family addressing modes and machine
instructions or the 740 Family Software Manual for details on the
instruction set.
Machine-resident 740 family instructions are as follows:
The FST and SLW instruction cannot be used.
The STP, WIT, MUL, and DIV instruction can be used.
[Accumulator (A)]
The accumulator is an 8-bit register. Data operations such as data
transfer, etc., are executed mainly through the accumulator.
[Index Register X (X)]
The index register X is an 8-bit register. In the index addressing
modes, the value of the OPERAND is added to the contents of
register X and specifies the real address.
[Index Register Y (Y)]
The index register Y is an 8-bit register. In partial instruction, the
value of the OPERAND is added to the contents of register Y and
specifies the real address.
[Stack Pointer (S)]
The stack pointer is an 8-bit register used during subroutine calls
and interrupts. This register indicates start address of stored area
(stack) for storing registers during subroutine calls and interrupts.
The low-order 8 bits of the stack address are determined by the
contents of the stack pointer. The high-order 8 bits of the stack
address are determined by the stack page selection bit. If the
stack page selection bit is “0” , the high-order 8 bits becomes
“0016”. If the stack page selection bit is “1”, the high-order 8 bits
becomes “0116”.
The operations of pushing register contents onto the stack and
popping them from the stack are shown in Figure 9.
Store registers other than those described in Figure 9 with pro-
gram when the user needs them during interrupts or subroutine
calls.
[Program Counter (PC)]
The program counter is a 16-bit counter consisting of two 8-bit
registers PCH and PCL. It is used to indicate the address of the
next instruction to be executed.
Fig. 8 740 Family CPU register structure
A
Accumulator
b7
b0
b7
b15
b0
b7
b0
X
Index register X
Y
Index register Y
S
Stack pointer
PCL
Program counter
PCH
N V T B D I Z C
Processor status register (PS)
Carry flag
Zero flag
Interrupt disable flag
Decimal mode flag
Break flag
Index X mode flag
Overflow flag
Negative flag
相關PDF資料
PDF描述
M38257E8FP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP100
M38258MCMXXXHP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP100
M38258MCDXXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP100
M38259EFHP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP100
M38259EFFP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M38258MCM084 制造商:Panasonic Industrial Company 功能描述:IC
M3826 功能描述:電纜固定件和配件 LTRSCG 1000 BLACK RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度:
M3826 BK001 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 1000'
M3826 BK002 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 500'
M3826 BK005 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 100'