參數資料
型號： M95128-DW3GP
廠商： 意法半導體
元件分類： DRAM
英文描述： 128 Kbit Serial SPI bus EEPROM with high speed clock
中文描述： 128千位的SPI高速時鐘總線的EEPROM
文件頁數： 18/41頁
文件大?。?/td> 207K
代理商： M95128-DW3GP
Instructions
M95128, M95128-W, M95128-R
18/41
Table 5.
The protection features of the device are summarized in
Table 2
.
When the Status Register Write Disable (SRWD) bit of the Status Register is 0 (its initial
delivery state), it is possible to write to the Status Register provided that the Write Enable
Latch (WEL) bit has previously been set by a Write Enable (WREN) instruction, regardless
of the whether Write Protect (W) is driven High or Low.
When the Status Register Write Disable (SRWD) bit of the Status Register is set to 1, two
cases need to be considered, depending on the state of Write Protect (W):
If Write Protect (W) is driven High, it is possible to write to the Status Register provided
that the Write Enable Latch (WEL) bit has previously been set by a Write Enable
(WREN) instruction.
If Write Protect (W) is driven Low, it is
not
possible to write to the Status Register
even
if the Write Enable Latch (WEL) bit has previously been set by a Write Enable (WREN)
instruction. (Attempts to write to the Status Register are rejected, and are not accepted
for execution). As a consequence, all the data bytes in the memory area that are
software protected (SPM) by the Block Protect (BP1, BP0) bits of the Status Register,
are also hardware protected against data modification.
●
●
Regardless of the order of the two events, the Hardware Protected Mode (HPM) can be
entered:
by setting the Status Register Write Disable (SRWD) bit after driving Write Protect (W)
Low
or by driving Write Protect (W) Low after setting the Status Register Write Disable
(SRWD) bit.
●
●
The only way to exit the Hardware Protected Mode (HPM) once entered is to pull Write
Protect (W) High.
If Write Protect (W) is permanently tied High, the Hardware Protected Mode (HPM) can
never be activated, and only the Software Protected Mode (SPM), using the Block Protect
(BP1, BP0) bits of the Status Register, can be used.
Protection modes
W Signal
SRWD
Bit
Mode
Write Protection of the
Status Register
Memory Content
Protected Area
(1)
1.
As defined by the values in the Block Protect (BP1, BP0) bits of the Status Register, as shown in
Table 5
.
Unprotected Area
(1)
1
0
Software
Protected
(SPM)
Status Register is
Writable (if the WREN
instruction has set the
WEL bit)
The values in the BP1
and BP0 bits can be
changed
Write Protected
Ready to accept Write
instructions
0
0
1
1
0
1
Hardware
Protected
(HPM)
Status Register is
Hardware write
protected
The values in the BP1
and BP0 bits cannot be
changed
Write Protected
Ready to accept Write
instructions
相關PDF資料
PDF描述
M95128-DW3GV 128 Kbit Serial SPI bus EEPROM with high speed clock
M95128-DW3PP 128 Kbit Serial SPI bus EEPROM with high speed clock
M95128-DW3PV 128 Kbit Serial SPI bus EEPROM with high speed clock
M95128-DW3TGP 128 Kbit Serial SPI bus EEPROM with high speed clock
M95128-DW3TGV 128 Kbit Serial SPI bus EEPROM with high speed clock
相關代理商/技術參數
參數描述
M95128-DW3GV 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:128 Kbit Serial SPI bus EEPROM with high speed clock
M95128-DW3P 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:256Kbit and 128Kbit Serial SPI Bus EEPROM With High Speed Clock
M95128-DW3P/A 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:128 Kbit serial SPI bus EEPROM with high speed clock
M95128-DW3P/P 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:128 Kbit serial SPI bus EEPROM with high speed clock
M95128-DW3P/PC 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:128 Kbit serial SPI bus EEPROM with high speed clock
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*