
MAX1020/MAX1022/MAX1057/MAX1058
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
______________________________________________________________________________________
27
Table 6. Unipolar-Mode Register (Addressed Through the Setup Register)
BIT NAME
BIT
FUNCTION
UCH0/1
7 (MSB)
Configure AIN0 and AIN1 for unipolar differential conversion.
UCH2/3
6
Configure AIN2 and AIN3 for unipolar differential conversion.
UCH4/5
5
Configure AIN4 and AIN5 for unipolar differential conversion.
UCH6/7
4
Configure AIN6 and AIN7 for unipolar differential conversion.
UCH8/9
3
Configure AIN8 and AIN9 for unipolar differential conversion.
UCH10/11
2
Configure AIN10 and AIN11 for unipolar differential conversion.
UCH12/13
1
Configure AIN12 and AIN13 for unipolar differential conversion.
UCH14/15
0 (LSB)
Configure AIN14 and AIN15 for unipolar differential conversion.
Table 7. Bipolar-Mode Register (Addressed Through the Setup Register)
BIT NAME
BIT
FUNCTION
BCH0/1
7 (MSB)
Set to one to configure AIN0 and AIN1 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN0 and AIN1 for unipolar
single-ended conversion.
BCH2/3
6
Set to one to configure AIN2 and AIN3 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN2 and AIN3 for unipolar
single-ended conversion.
BCH4/5
5
Set to one to configure AIN4 and AIN5 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN4 and AIN5 for unipolar
single-ended conversion.
BCH6/7
4
Set to one to configure AIN6 and AIN7 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN6 and AIN7 for unipolar
single-ended conversion.
BCH8/9
3
Set to one to configure AIN8 and AIN9 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN8 and AIN9 for unipolar
single-ended conversion.
BCH10/11
2
Set to one to configure AIN10 and AIN11 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN10 and AIN11 for
unipolar single-ended conversion.
BCH12/13
1
Set to one to configure AIN12 and AIN13 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN12 and AIN13 for
unipolar single-ended conversion.
BCH14/15
0 (LSB)
Set to one to configure AIN14 and AIN15 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN14 and AIN15 for
unipolar single-ended conversion.