參數資料
型號： MAX19708ETM+
廠商： Maxim Integrated Products
文件頁數： 22/37頁
文件大?。?/td> 0K
描述： IC ANLG FRONT END 11MSPS 48-TQFN
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 43
位數： 10
通道數： 4
功率（瓦特）： 36.9mW
電壓 - 電源，模擬： 3V
電壓 - 電源，數字： 3V
封裝/外殼： 48-WFQFN 裸露焊盤
供應商設備封裝： 48-TQFN-EP（7x7）
包裝： 管件
產品目錄頁面： 1398 (CN2011-ZH PDF)
MAX19708
10-Bit, 11Msps, Ultra-Low-Power
Analog Front-End
______________________________________________________________________________________
29
Reference Configurations
The MAX19708 features an internal precision 1.024V
bandgap reference that is stable over the entire power-
supply and temperature ranges. The REFIN input pro-
vides two modes of reference operation. The voltage at
REFIN (VREFIN) sets the reference operation mode
(Table 18).
In internal reference mode, connect REFIN to VDD.
VREF is an internally generated 0.512V ±4%. COM,
REFP, and REFN are low-impedance outputs with
VCOM = VDD / 2, VREFP = VDD / 2 + VREF / 2, and
VREFN = VDD / 2 - VREF / 2. Bypass REFP, REFN, and
COM each with a 0.33F capacitor. Bypass REFIN to
GND with a 0.1F capacitor.
In buffered external reference mode, apply 1.024V
±10% at REFIN. In this mode, COM, REFP, and REFN
are low-impedance outputs with VCOM = VDD / 2,
VREFP = VDD / 2 + VREFIN / 4, and VREFN = VDD / 2 -
VREFIN / 4. Bypass REFP, REFN, and COM each with a
0.33F capacitor. Bypass REFIN to GND with a 0.1F
capacitor. In this mode, the Tx path full-scale output is
proportional to the external reference. For example, if
the VREFIN is increased by 10% (max), the Tx path full-
scale output is also increased by 10% or ±451mV.
Applications Information
Using Balun Transformer AC-Coupling
An RF transformer (Figure 9) provides an excellent
solution to convert a single-ended signal source to a
fully differential signal for optimum ADC performance.
Connecting the center tap of the transformer to COM
provides a VDD / 2 DC level shift to the input. A 1:1
transformer can be used, or a step-up transformer can
be selected to reduce the drive requirements. In gener-
al, the MAX19708 provides better SFDR and THD with
fully differential input signals than single-ended signals,
especially for high input frequencies. In differential
mode, even-order harmonics are lower as both inputs
(IAP, IAN, QAP, QAN) are balanced, and each of the
Rx ADC inputs only requires half the signal swing com-
pared to single-ended mode. Figure 10 shows an RF
transformer converting the MAX19708 Tx DAC differen-
tial analog outputs to single-ended.
Using Op-Amp Coupling
Drive the MAX19708 Rx ADC with op amps when a
balun transformer is not available. Figures 11 and 12
show the Rx ADC being driven by op amps for AC-cou-
pled single-ended and DC-coupled differential applica-
tions. Amplifiers such as the MAX4454 and MAX4354
provide high speed, high bandwidth, low noise, and
Table 18. Reference Modes
VREFIN
REFERENCE MODE
> 0.8V x VDD
Internal Reference Mode. VREF is internally generated to be 0.512V. Bypass REFP, REFN, and COM each
with a 0.33F capacitor.
1.024V ±10%
Buffered External Reference Mode. An external 1.024V ±10% reference voltage is applied to REFIN. VREF is
internally generated to be VREFIN / 2. Bypass REFP, REFN, and COM each with a 0.33F capacitor. Bypass
REFIN to GND with a 0.1F capacitor.
Figure 9. Balun Transformer-Coupled Single-Ended-to-
Differential Input Drive for Rx ADC
COM
IAP
IAN
25
Ω
0.1
μF
0.33
μF
25
Ω
0.1
μF
VIN
MAX19708
22pF
QAP
QAN
25
Ω
0.1
μF
0.33
μF
25
Ω
0.1
μF
VIN
22pF
相關PDF資料
PDF描述
MAX19710ETN+T IC ANLG FRNT END 56-TQFN
MAX19711ETN+T IC ANLG FRNT END 56-TQFN
MAX19712ETN+T IC ANLG FRNT END 56-TQFN
MAX19713ETN+T IC ANLG FRNT END 56-TQFN
MAX271ENG+ IC FILTER LOWPASS PROG 24-DIP
相關代理商/技術參數
參數描述
MAX19708ETM+ 功能描述:ADC / DAC多通道 11Msps CODEC/AFE 1.8/2.7-3.3V RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX19708ETM+T 功能描述:ADC / DAC多通道 11Msps CODEC/AFE 1.8/2.7-3.3V RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX19708ETM-T 功能描述:ADC / DAC多通道 RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX19708EVCMOD2 功能描述:ADC / DAC多通道 Maxim Evaluation System RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX19708EVCMODU 功能描述:ADC / DAC多通道 10-bit 11Msps Ultra-Low-Power Analog Front-End RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*