SPI/I2C UART with 128-Word FIFOs 7) The master sends the 7-bit slave ID plus a r" />
參數資料
型號： MAX3107EAG+
廠商： Maxim Integrated Products
文件頁數： 42/52頁
文件大?。?/td> 0K
描述： IC UART SPI/I2C 128 FIFO 24SSOP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 58
特點： 內部振蕩器
通道數： 4，QUART
FIFO's： 128 字節
規程： RS232，RS485
電源電壓： 2.35 V ~ 3.6 V
帶自動流量控制功能： 是
帶IrDA 編碼器/解碼器： 是
帶故障啟動位檢測功能： 是
安裝類型： 表面貼裝
封裝/外殼： 24-SSOP（0.209"，5.30mm 寬）
供應商設備封裝： 24-SSOP
包裝： 管件
SPI/I2C UART with 128-Word FIFOs
7) The master sends the 7-bit slave ID plus a read bit (high).
8) The addressed slave asserts an ACK on the data
line.
9) The slave sends 8 data bits.
10) The master asserts a NACK on the data line.
11) The master generates a STOP condition.
Burst Read
With this operation the master sends an address and
receives multiple data bytes from the slave device
(Figure 21). The burst read procedure is as follows:
1) The master sends a START condition.
2) The master sends the 7-bit slave ID plus a write bit (low).
3) The addressed slave asserts an ACK on the data line.
4) The master sends the 8-bit register address.
5) The slave asserts an ACK on the data line only if the
address is valid (NACK if not).
6) The master sends a repeated START condition.
7) The master sends the 7-bit slave ID plus a read bit
(high). 8) The slave asserts an ACK on the data line.
9) The slave sends 8 bits of data.
10) The master asserts an ACK on the data line.
11) Repeat steps 9 and 10 N - 1 times.
12) The master generates a STOP condition.
Acknowledge
Data transfers are acknowledged with an acknowledge
bit (ACK) or a not-acknowledge bit (NACK). Both the
master and the MAX3107 generate ACK bits. To gener-
ate an ACK, pull SDA low before the rising edge of the
9th clock pulse and keep it low during the high period of
the 9th clock pulse (see Figure 22). To generate a NACK,
leave SDA high before the rising edge of the 9th clock
pulse and keep it high for the duration of the 9th clock
pulse. Monitoring for NACK bits allows for detection of
unsuccessful data transfers.
Applications Information
Startup and Initialization
The MAX3107 can be initialized following power-up or
a hardware or software reset as shown in Figure 23.
To verify that the MAX3107 is ready for operation after
a power-up or reset, check the IRQ output if interrupt
driven operation is employed.
In polled mode, repeatedly read a known register until
the expected contents are returned. Note that the con-
tents of the RevID change if new revisions of the product
are released. If reading RevID, it is recommended to only
check for the most significant 4 bits: Ah.
Figure 21. Burst Read Sequence
Figure 22. Acknowledge
S
Sr
DEVICE SLAVE ADDRESS - W
A
DEVICE SLAVE ADDRESS - R
BURST READ
A
REGISTER ADDRESS
A
8 DATA BITS - 1
A
8 DATA BITS - 3
8 DATA BITS - 2
A
8 DATA BITS - N
A
FROM MASTER TO STAVE
FROM SLAVE TO MASTER
P
NOT ACKNOWLEDGE
ACKNOWLEDGE
1
2
8
9
SDA
SCL
S
Maxim Integrated
47
MAX3107
相關PDF資料
PDF描述
MAX3108EWA+T IC UART
MAX3109ETJ+ SEMICONDUCTOR OTHER
MAX310CPE IC VIDEO MULTIPLEXER 8X1 16DIP
MAX3110EENI+G36 IC UART SPI COMPAT 28-DIP
MAX3120CUA+ IC TXRX INFRARED IRDA 8-UMAX
相關代理商/技術參數
參數描述
MAX3107EAG+ 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107EAG+T 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG/V+ 功能描述:UART 接口集成電路 UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG/V+T 功能描述:UART 接口集成電路 SPI/IC UART with 128-Word FIFOs and Internal Oscillator RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG+ 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*