參數資料
型號: MB90F823PF
廠商: Electronic Theatre Controls, Inc.
英文描述: Scan Test Devices With Octal Bus Transceivers 28-LCCC -55 to 125
中文描述: 16位微控制器專有
文件頁數: 17/98頁
文件大小: 1415K
代理商: MB90F823PF
MB90820 Series
17
Turn-off the digital power after turning off the A/D converter and D/A converter supply and analog inputs. In this
case, make sure that the voltage of AVR does not exceed AV
CC
(turning on/off the analog and digital power
supplies simultaneously is acceptable).
Connection of unused pins of A/D converter and D/A converter
7.
When the A/D converter and D/A converter are not used, connect the pins as follows: AV
CC
= V
CC
, AV
SS
=
AVR = V
SS
.
N.C. pin
8.
The N.C. (internally connected) pin must be opened for use.
Notes on energization
9.
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at
50
μ
s or more.
10. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. To initialize these registers
turning on the power again.
11. Return from standby state
If the power supply voltage goes below the standby RAM holding voltage in the standby state, the device may
fail to return from the standby state. In this case, reset the device via the external reset pin to return to the normal
state.
相關PDF資料
PDF描述
MB90F823PFM Scan Test Devices With Octal Bus Transceivers 24-CDIP -55 to 125
MB90F823PFV 10-Bit Buffers/Drivers With 3-State Outputs 28-LCCC -55 to 125
MB90822PFV 10-Bit Buffers/Drivers With 3-State Outputs 24-CFP -55 to 125
MB90822 16-bit Proprietary Microcontroller
MB90822PF 16-bit Proprietary Microcontroller
相關代理商/技術參數
參數描述
MB90F867APFR-G-SNE1 制造商:FUJITSU 功能描述:
MB90F867ASPF-GE1 制造商:FUJITSU 功能描述:IC 16BIT MCU I2C SMD QFP100
MB90F867ASPFR-GE1 制造商:FUJITSU 功能描述:
MB90F867ASPFR-G-SPE1 制造商:FUJITSU 功能描述:
MB90F897PMCR-G-TE1 制造商:FUJITSU 功能描述: