MB90920 Series
42
DS07-13750-3E
2.
Recommended Operating Conditions
(VSS
= DVSS = AVSS = 0.0 V)
* : Refer to the following diagram for details on the connection of the smoothing capacitor CS.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
Parameter
Symbol
Value
Unit
Remarks
Min
Max
Power supply
voltage
VCC
AVCC
DVCC
4.0
5.5
V
The low voltage detection reset operates when the power
supply voltage reaches 4.2 V
± 0.2 V.
4.4
5.5
V
Maintain stop operation status
The low voltage detection reset operates when the power
supply voltage reaches 4.2 V
± 0.2 V.
Smoothing
capacitor*
CS
0.1
1.0
F
Use a ceramic capacitor or other capacitor of equivalent
frequency characteristics. Use a capacitor with a capaci-
tance greater than this capacitor as the bypass capacitor for
the VCC pin.
Operating
temperature
TA
40
+ 105
°C
C
CS
VSS
DVSS
AVSS
C pin connection diagram