參數資料
型號: MC68HC05SU3AFB
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP44
封裝: QFP-44
文件頁數: 55/80頁
文件大?。?/td> 328K
代理商: MC68HC05SU3AFB
MC68HC05SU3A
MOTOROLA
7-13
CPU CORE AND INSTRUCTION SET
7
7.3.8
Relative
The relative addressing mode is only used in branch instructions. In relative addressing, the
contents of the 8-bit signed byte (the offset) following the opcode are added to the PC if, and only
if, the branch conditions are true. Otherwise, control proceeds to the next instruction. The span of
relative addressing is from –126 to +129 from the opcode address. The programmer need not
calculate the offset when using the Motorola assembler, since it calculates the proper offset and
checks to see that it is within the span of the branch.
EA = PC+2+(PC+1); PC
← EA if branch taken;
otherwise EA = PC
← PC+2
7.3.9
Bit set/clear
In the bit set/clear addressing mode, the bit to be set or cleared is part of the opcode. The byte
following the opcode species the address of the byte in which the specied bit is to be set or
cleared. Any read/write bit in the rst 256 locations of memory, including I/O, can be selectively
set or cleared with a single two-byte instruction.
EA = (PC+1); PC
← PC+2
Address bus high
← 0; Address bus low ← (PC+1)
7.3.10
Bit test and branch
The bit test and branch addressing mode is a combination of direct addressing and relative
addressing. The bit to be tested and its condition (set or clear) is included in the opcode. The
address of the byte to be tested is in the single byte immediately following the opcode byte (EA1).
The signed relative 8-bit offset in the third byte (EA2) is added to the PC if the specied bit is set
or cleared in the specied memory location. This single three-byte instruction allows the program
to branch based on the condition of any readable bit in the rst 256 locations of memory. The span
of branch is from –125 to +130 from the opcode address. The state of the tested bit is also
transferred to the carry bit of the condition code register.
EA1 = (PC+1); PC
← PC+2
Address bus high
← 0; Address bus low ← (PC+1)
EA2 = PC+3+(PC+2); PC
← EA2 if branch taken;
otherwise PC
← PC+3
TPG
57
相關PDF資料
PDF描述
MC68HC05SU3AB 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP42
MC68HC05SU3AP 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
MC68HC05T4B 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP42
MC68HC05V7CFNR2 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
MC68HC05V7FNR2 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
相關代理商/技術參數
參數描述
MC68HC05T16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
MC68HC05V12 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontreller Unit
MC68HC05V12CFN 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05X16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X32 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit