參數資料
型號: MC68HC11F1CPU4R2
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, EEPROM, 4 MHz, MICROCONTROLLER, PQFP80
封裝: 14 X 14 MM, 1.40 MM HEIGHT, PLASTIC, LQFP-80
文件頁數: 97/163頁
文件大小: 711K
代理商: MC68HC11F1CPU4R2
MC68HC11F1
OPERATING MODES AND ON-CHIP MEMORY
MOTOROLA
TECHNICAL DATA
4-1
SECTION 4OPERATING MODES AND ON-CHIP MEMORY
This section contains information about the modes that define MC68HC11F1 operat-
ing conditions, and about the on-chip memory that allows the MCU to be configured
for various applications.
4.1 Operating Modes
The values of the mode select inputs MODB and MODA during reset determine the
operating mode. Single chip and expanded modes are the normal modes. In single-
chip mode only on-board resources are available. Expanded mode, however, allows
access to external memory or peripheral devices. Each of these two normal modes is
paired with a special mode. Bootstrap mode, a variation of the single-chip mode, exe-
cutes a bootloader program from an internal bootstrap ROM. Test mode allows privi-
leged access to internal resources.
4.1.1 Single-Chip Operating Mode
In single-chip operating mode, the MC68HC11F1 has no external address or data bus.
Ports B, C, and F are available for general-purpose I/O.
4.1.2 Expanded Operating Mode
In expanded operating mode, the MCU can access a 64-Kbyte physical address
space. The address space includes the same on-chip memory addresses used for sin-
gle-chip mode, in addition to external memory and peripheral devices.
The expansion bus is made up of ports B, C, F and the R/W signal. In expanded mode,
high order address bits are output on the port B pins, low order address bits on the port
F pins, and the data bus on port C. The R/W pin indicates the direction of data transfer
on the port C bus.
4.1.3 Special Test Mode
Special test mode, a variation of the expanded mode, is primarily used during Motor-
ola's internal production testing; however, it is accessible for programming the CON-
FIG register, programming calibration data into EEPROM, and supporting emulation
and debugging during development.
4.1.4 Special Bootstrap Mode
Bootstrap mode is a special variation of the single-chip mode. Bootstrap mode allows
special-purpose programs to be entered into internal RAM. When boot mode is select-
ed at reset, a small bootstrap ROM becomes present in the memory map. Reset and
interrupt vectors are located in bootstrap ROM at $BFC0–$BFFF. The MCU fetches
the reset vector, then executes the bootloader.
相關PDF資料
PDF描述
MC68HC11F1CFN3 8-BIT, EEPROM, 3 MHz, MICROCONTROLLER, PQCC68
MC68HC11F1CFN2 8-BIT, EEPROM, 2 MHz, MICROCONTROLLER, PQCC68
MC68HC11F1VFN2 8-BIT, EEPROM, 2 MHz, MICROCONTROLLER, PQCC68
MC68HC11F1MFN3 8-BIT, EEPROM, 3 MHz, MICROCONTROLLER, PQCC68
MC68HC11K3CFU2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
MC68HC11F1CPU5 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Technical Summary 8-Bit Microcontroller
MC68HC11F1CPUE5 制造商:Freescale Semiconductor 功能描述:
MC68HC11F1FB 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:ROM-based high-performance microcontrollers
MC68HC11F1FB1 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:ROM-based high-performance microcontrollers
MC68HC11F1FB3 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:ROM-based high-performance microcontrollers