參數資料
型號: mcp3208
廠商: Microchip Technology Inc.
元件分類: 串行ADC
英文描述: 2.7V 4-Channel/8-Channel 12-Bit A/D Converters With SPI Serial Interface(SPI串行接口的8通道12位A/D轉換器)
中文描述: 2.7 4-Channel/8-Channel 12位A / D轉換器具有SPI串行接口(SPI串行接口的8通道12位的A / D轉換器)
文件頁數: 19/34頁
文件大?。?/td> 673K
代理商: MCP3208
2002 Microchip Technology Inc.
DS21298C-page 19
MCP3204/3208
6.2
Maintaining Minimum Clock
Speed
When the MCP3204/3208 initiates the sample period,
charge is stored on the sample capacitor. When the
sample period is complete, the device converts one bit
for each clock that is received. It is important for the
user to note that a slow clock rate will allow charge to
bleed off the sample capacitor while the conversion is
taking place. At 85°C (worst case condition), the part
will maintain proper charge on the sample capacitor for
at least 1.2 ms after the sample period has ended. This
means that the time between the end of the sample
period and the time that all 12 data bits have been
clocked out must not exceed 1.2 ms (effective clock
frequency of 10 kHz). Failure to meet this criterion may
introduce linearity errors into the conversion outside
the rated specifications. It should be noted that during
the entire conversion cycle, the A/D converter does not
require a constant clock speed or duty cycle, as long as
all timing specifications are met.
6.3
Buffering/Filtering the Analog
Inputs
If the signal source for the A/D converter is not a low
impedance source, it will have to be buffered or inaccu-
rate conversion results may occur (see Figure 4-2). It is
also recommended that a filter be used to eliminate any
signals that may be aliased back into the conversion
results, as is illustrated in Figure 6-3, where an op amp
is used to drive the analog input of the MCP3204/3208.
This amplifier provides a low impedance source for the
converter input, and a low pass filter, which eliminates
unwanted high frequency noise.
Low pass (anti-aliasing) filters can be designed using
Microchip’s free interactive FilterLab software. Filter-
Lab will calculate capacitor and resistor values, as well
as determine the number of poles that are required for
the application. For more information on filtering sig-
nals, see AN699,
“Anti-Aliasing Analog Filters for Data
Acquisition Systems”
.
FIGURE 6-3:
filter for the signal being converted by the MCP3204.
The MCP601 Operational Amplifier is used to implement a second order anti-aliasing
MCP3204
V
DD
10 μF
IN-
IN+
-
+
V
IN
C
1
C
2
V
REF
4.096V
Reference
1 μF
1 μF
0.1 μF
MCP601
R
1
R
2
R
3
R
4
MCP1541
相關PDF資料
PDF描述
MCP3208-CIP 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-CIST 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-BIP CBS SCREW-MOUNT NYLON 3/4,1
MCP3204-BISL 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
相關代理商/技術參數
參數描述
MCP-320-81302-0B 制造商:Supermicro Computer Inc 功能描述:OPTIONAL FAN TRAY FOR ONE 40X28MM FAN IN SC813 - Bulk
MCP-320-81802-0B 制造商:SUPER MICRO COMPUTER, INC. 功能描述:SC818_GPU_FAN _HOLDER_2_4028_ASSY (A5-SC81806-XX00C101) - Bulk
MCP-320-83602-0N-AI031 制造商:Supermicro Computer Inc 功能描述:EXTRA 80MM FAN BRACKET SET FOR OEM SC836 - Bulk
MCP3208-BI/P 功能描述:模數轉換器 - ADC 12-bit SPI 8 Chl RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32
MCP3208-BI/SL 功能描述:模數轉換器 - ADC 12-bit SPI 8 Chl RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32