- 您現在的位置：買賣IC網 > PDF目錄367625 > MMBZ18VCL (NXP SEMICONDUCTORS) Double ESD protection diodes for transient overvoltage suppression PDF資料下載
參數資料
| 型號： | MMBZ18VCL |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 參考電壓二極管 |
| 英文描述： | Double ESD protection diodes for transient overvoltage suppression |
| 中文描述： | TVS DIODE, TO-236AB |
| 封裝： | PLASTIC, SMD, 3 PIN |
| 文件頁數： | 14/15頁 |
| 文件大小： | 79K |
| 代理商： | MMBZ18VCL |
MMBZXVCL_MMBZXVDL_SER_1
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 01 — 3 September 2008
14 of 15
NXP Semiconductors
MMBZxVCL; MMBZxVDL series
Double ESD protection diodes for transient overvoltage suppression
14. Legal information
14.1
Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
.14.2
Definitions
Draft —
The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet —
A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
14.3
Disclaimers
General —
Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes —
NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use —
NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications —
Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values —
Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale —
NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at
http://www.nxp.com/profile/terms
, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license —
Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data —
The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
ESD protection devices —
These products are only intended for protection
against ElectroStatic Discharge (ESD) pulses and are not intended for any
other usage including, without limitation, voltage regulation applications. NXP
Semiconductors accepts no liability for use in such applications and therefore
such use is at the customer’s own risk.
14.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
15. Contact information
For more information, please visit:
http://www.nxp.com
For sales office addresses, please send an email to:
salesaddresses@nxp.com
Document status
[1][2]
Product status
[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
相關PDF資料 |
PDF描述 |
|---|---|
| MMBZ20VCL | Double ESD protection diodes for transient overvoltage suppression |
| MMBZ33VCL | Double ESD protection diodes for transient overvoltage suppression |
| MPT612FBD48 | Maximum power point tracking IC |
| MX0912B251Y | NPN microwave power transistor |
| MX0912B251Y | NPN microwave power transistor |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MMBZ18VCL,215 | 功能描述:ESD 抑制器 Diode TVS Dual/Singl 14.5V 40W 3-Pin RoHS:否 制造商:STMicroelectronics 通道:8 Channels 擊穿電壓:8 V 電容:45 pF 端接類型:SMD/SMT 封裝 / 箱體:uQFN-16 功率耗散 Pd: 工作溫度范圍:- 40 C to + 85 C |
| MMBZ18VCL/DG | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Double ESD protection diodes for transient overvoltage suppression |
| MMBZ18VCL215 | 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述: |
| MMBZ18VCLDG | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Double ESD protection diodes for transient overvoltage suppression |
| MMBZ18VDG | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Double ESD protection diodes for transient overvoltage suppression |
發布緊急采購，3分鐘左右您將得到回復。