MPC560xP Datasheet Data Sheet, Rev. 1
Preliminary—Subject to Change Without Notice
Freescale Semiconductor
27
VDD_LV_PLL
SR
Internal supply voltage
—
V
SR
Internal reference voltage
—
0
V
TA
SR
Ambient temperature under bias
fCPU = 64 MHz
-40
105
°C
TJ
SR
Junction temperature under bias
—
-40
150
°C
1 Full functionality cannot be guaranteed when voltage drops below 4.5 V. In particular, ADC electrical characteristics and
I/Os DC electrical specification may not be guaranteed.
2 The power supply voltage must be identical for ADC0 and ADC1
3 To be connected to emitter of external NPN. Low voltage supplies are not under user control—they are produced by an
on-chip voltage regulator—but for the device to function properly the low voltage grounds (VSS_LV_xxx) must be shorted
to high voltage grounds (VSS_HV_xxx) and the low voltage supply pins (VDD_LV_xxx) must be connected to the external
ballast emitter.
4 The low voltage supplies (V
DD_LV_xxx) are not all independent.
VDD_LV_COR1 and VDD_LV_COR2 are shorted internally via double bonding connections with lines that provide
the low voltage supply to the data flash module. The integrity of the connections are monitored by an on-chip
supply and ground comparator. Similarly, VSS_LV_COR1 and VSS_LV_COR2 are internally shorted and monitored.
VDD_LV_REGCOR and VDD_LV_RECORx are physically shorted internally, as are VSS_LV_REGCOR and
VSS_LV_CORx.
VDD_LV_PLL and VSS_LV_PLL are independent of other supplies.
5 Low voltage supply/ground lines of the FMPLLs internally are physically separate but are shorted with a double-bonding
connection on the VDD_LV_PLL and VSS_LV_PLL pins.
Table 7. Recommended Operating Conditions (3.3 V)
Symbol
Parameter
Conditions
Min
Max1
Unit
VDD_HV_REG
SR
3.3 V voltage regulator supply voltage
—
3.0
3.6
V
VDD_HV_IOx
SR
3.3 V input/output supply voltage
—
3.0
3.6
V
VSS_HV_IOx
SR
Input/output ground voltage
—
0
V
VDD_HV_FL
SR
3.3 V code and data flash supply voltage
—
3.0
3.6
V
VSS_HV_FL
SR
Code and data flash ground
—
0
V
VDD_HV_OSC
SR
3.3 V crystal oscillator amplifier supply
voltage
—3.0
3.6
V
VSS_HV_OSC
SR
3.3 V crystal oscillator amplifier reference
voltage
—0
0
V
VDD_HV_AD0
2
SR
3.3 V ADC0 supply and high reference
voltage
—3.0
3.6
V
VSS_HV_AD0
SR
ADC0 ground and low reference voltage
—
0
V
SR
3.3 V ADC1 supply and high reference
voltage
—3.0
3.6
V
VSS_HV_AD1
SR
ADC1 ground and low reference voltage
—
0
V
VDD_LV_REGCOR
3,4
SR
Internal supply voltage
—
V
SR
Internal reference voltage
—
0
V
Table 6. Recommended Operating Conditions (5.0 V) (continued)
Symbol
Parameter
Conditions
Min
Max1
Unit