Freescale Semiconductor
Data Sheet: Advance Information
Document Number: MPC5668X
Rev. 3, 9/2009
Freescale Semiconductor, Inc., 2009. All rights reserved.
Preliminary—Subject to Change Without Notice
This document contains information on a product under development. Freescale reserves the
right to change or discontinue this product without notice.
MPC5668x
MAPBGA–208
17 mm x 17 mm
MAPBGA–256
17 mm x 17 mm
MPC5668x features:
32-bit CPU core complex (e200z650)
– Compliant with Power Architecture embedded category
– 32 KB unified cache with line locking and eight-entry
store buffer
– Execution speed static to 116 MHz
32-bit I/O processor (e200z0)
– Execution speed static to 1/2 CPU core speed (58 MHz)
2 MB on-chip flash
– Supports read during program and erase operations, and
multiple blocks allowing EEPROM emulation
512 KB + 80 KB (592 KB) on-chip ECC SRAM
(MPC5668G)
128 KB on-chip ECC SRAM (MPC5668E)
16-entry Memory Protection Unit (MPC5668E only)
Direct memory access controller
– 16-channel on MPC5668G
– 32-channel on MPC5668E
Fast ethernet controller
– Supports 10-Mbps and 100-Mbps IEEE 802.3 MII,
10-Mbps 7-wire interface
– IEEE 802.3 MAC (compliant with IEEE 802.3 1998
edition)
Media Local Bus (MLB) interface (MPC5668G only)
– Supports 16 logical channels, max speed 1024 Fs
Interrupt controller (INTC) supports 316 external interrupt
vectors (22 are reserved)
System clocks
– Frequency-modulated phase-locked loop (FMPLL)
– 4–40MHz crystal oscillator (XTAL)
– 32 kHz crystal oscillator (XTAL)
– Dedicated 16 MHz and 128 kHz internal RC oscillators
Analog to Digital Converter (ADC) module
– 10-bit A/D resolution
– 32 external channels
– 36 internal channels (MPC5668G)
– 64 internal channels (MPC5668E)
Cross-Triggering Unit (MPC5668E only)
– Internal conversion triggering for ADC
– Triggerable by internal timers or eMIOS200
Deserial Serial Peripheral Interface (DSPI)
– Four individual DSPI modules
– Full duplex, synchronous transfers
– Master or slave operation
Inter-IC communication (I
2C) interface
– Four individual I2C modules
– Multi-master operation
Serial Communication Interface (eSCI) module
– Two-channel DMA interface
– Configurable as LIN bus master
eMIOS200 timed input/output
– 24 channels, 16-bit timers (MPC5668G)
– 32 channels, 16-bit timers (MPC5668E)
Controller Area Network (FlexCAN) module
– Compliant with CAN protocol specification, Version
2.0B active
– 64 mailboxes, each configurable as transmit or receive
Dual-channel FlexRay controller
– Full implementation of FlexRay Protocol Specification
2.1, RevA
– 128 message buffers
JTAG controller (MPC5668G only)
– Compliant with the IEEE 1149.1-2001
Nexus Development Interface (NDI)
– Available in 256 MAPBGA package only
– Compliant with IEEE-ISTO 5001-2003
– Nexus class 3 development support on e200z650
– Nexus class 2+ development support on e200z0
Internal voltage regulator allows operation from single
3.3 V or 5 V supply
MPC5668x Microcontroller
Data Sheet
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
MPC5668x
products
in
208
and
256
MAPBGA
packages