參數資料
型號: MSP430F6630IPZ
廠商: TEXAS INSTRUMENTS INC
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP100
封裝: PLASTIC, QFP-100
文件頁數: 19/105頁
文件大?。?/td> 1077K
代理商: MSP430F6630IPZ
PRODUCTPREVIEW
MSP430F663x
SLAS566A – JUNE 2010 – REVISED JULY 2010
www.ti.com
Table 8. Default Mapping (continued)
PIN
PxMAPy MNEMONIC
INPUT PIN FUNCTION
OUTPUT PIN FUNCTION
PM_UCA0TXD/PM_UCA0 USCI_A0 UART TXD (direction controlled by USCI - output) / USCI_A0 SPI slave
P2.4/P2MAP4
SIMO
in master out (direction controlled by USCI)
PM_UCA0RXD/PM_UCA0
USCI_A0 UART RXD (direction controlled by USCI - input) / USCI_A0 SPI slave
P2.5/P2MAP5
SOMI
out master in (direction controlled by USCI)
P2.6/P2MAP6/R03
PM_NONE
-
DVSS
P2.7/P2MAP7/LCDREF/R1
PM_NONE
-
DVSS
3
Oscillator and System Clock
The clock system in the MSP430F663x family of devices is supported by the Unified Clock System (UCS)
module that includes support for a 32 kHz watch crystal oscillator (XT1 LF mode - XT1 HF mode not supported),
an internal very-low-power low-frequency oscillator (VLO), an internal trimmed low-frequency oscillator (REFO),
an integrated internal digitally-controlled oscillator (DCO), and a high-frequency crystal oscillator XT2. The UCS
module is designed to meet the requirements of both low system cost and low-power consumption. The UCS
module features digital frequency locked loop (FLL) hardware that, in conjunction with a digital modulator,
stabilizes the DCO frequency to a programmable multiple of the watch crystal frequency. The internal DCO
provides a fast turn-on clock source and stabilizes in less than 5 s. The UCS module provides the following
clock signals:
Auxiliary clock (ACLK), sourced from a 32 kHz watch crystal (XT1), a high-frequency crystal (XT2), the
internal low-frequency oscillator (VLO), the trimmed low-frequency oscillator (REFO), or the internal
digitally-controlled oscillator DCO.
Main clock (MCLK), the system clock used by the CPU. MCLK can be sourced by same sources made
available to ACLK.
Sub-Main clock (SMCLK), the subsystem clock used by the peripheral modules. SMCLK can be sourced by
same sources made available to ACLK.
ACLK/n, the buffered output of ACLK, ACLK/2, ACLK/4, ACLK/8, ACLK/16, ACLK/32.
Power Management Module (PMM)
The PMM includes an integrated voltage regulator that supplies the core voltage to the device and contains
programmable output levels to provide for power optimization. The PMM also includes supply voltage supervisor
(SVS) and supply voltage monitoring (SVM) circuitry, as well as brownout protection. The brownout circuit is
implemented to provide the proper internal reset signal to the device during power-on and power-off. The
SVS/SVM circuitry detects if the supply voltage drops below a user-selectable level and supports both supply
voltage supervision (the device is automatically reset) and supply voltage monitoring (SVM, the device is not
automatically reset). SVS and SVM circuitry is available on the primary supply and core supply.
Hardware Multiplier
The multiplication operation is supported by a dedicated peripheral module. The module performs operations with
32-bit, 24-bit, 16-bit, and 8-bit operands. The module is capable of supporting signed and unsigned multiplication
as well as signed and unsigned multiply and accumulate operations.
Real-Time Clock (RTC_B)
The RTC_B module can be configured for real-time clock (RTC) and calendar mode providing seconds, minutes,
hours, day of week, day of month, month, and year. Calendar mode integrates an internal calendar which
compensates for months with less than 31 days and includes leap year correction. The RTC_B also supports
flexible alarm functions and offset-calibration hardware. The implementation on this device supports operation in
LPM3.5 mode and operation from a backup supply.
Watchdog Timer (WDT_A)
The primary function of the watchdog timer (WDT_A) module is to perform a controlled system restart after a
software problem occurs. If the selected time interval expires, a system reset is generated. If the watchdog
function is not needed in an application, the module can be configured as an interval timer and can generate
interrupts at selected time intervals.
20
Copyright 2010, Texas Instruments Incorporated
相關PDF資料
PDF描述
MSP430F6631IZQW 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PBGA113
MSP430F6633IZQW 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PBGA113
MSP430FE423AIPMR 16-BIT, FLASH, 8.4 MHz, RISC MICROCONTROLLER, PQFP64
MSP430FE4252IPMR 16-BIT, FLASH, 8.4 MHz, RISC MICROCONTROLLER, PQFP64
MSP430FG438IPN 16-BIT, FLASH, 8 MHz, RISC MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
MSP430F6630IPZR 功能描述:16位微控制器 - MCU MIXED SIGNAL MCU RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
MSP430F6630IZQWR 功能描述:16位微控制器 - MCU MIXED SIGNAL MCU RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
MSP430F6631IPZ 功能描述:16位微控制器 - MCU MIXED SIGNAL MCU RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
MSP430F6631IPZR 功能描述:16位微控制器 - MCU MIXED SIGNAL MCU RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
MSP430F6631IZQWR 功能描述:16位微控制器 - MCU MIXED SIGNAL MCU RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT