- 您現在的位置：買賣IC網 > PDF目錄359234 > MT9072 (Zarlink Semiconductor Inc.) Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 PDF資料下載
參數資料
| 型號： | MT9072 |
| 廠商： | Zarlink Semiconductor Inc. |
| 元件分類： | 通信及網絡 |
| 英文描述： | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| 中文描述： | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| 文件頁數： | 75/275頁 |
| 文件大小： | 3738K |
| 代理商： | MT9072 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁當前第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁第171頁第172頁第173頁第174頁第175頁第176頁第177頁第178頁第179頁第180頁第181頁第182頁第183頁第184頁第185頁第186頁第187頁第188頁第189頁第190頁第191頁第192頁第193頁第194頁第195頁第196頁第197頁第198頁第199頁第200頁第201頁第202頁第203頁第204頁第205頁第206頁第207頁第208頁第209頁第210頁第211頁第212頁第213頁第214頁第215頁第216頁第217頁第218頁第219頁第220頁第221頁第222頁第223頁第224頁第225頁第226頁第227頁第228頁第229頁第230頁第231頁第232頁第233頁第234頁第235頁第236頁第237頁第238頁第239頁第240頁第241頁第242頁第243頁第244頁第245頁第246頁第247頁第248頁第249頁第250頁第251頁第252頁第253頁第254頁第255頁第256頁第257頁第258頁第259頁第260頁第261頁第262頁第263頁第264頁第265頁第266頁第267頁第268頁第269頁第270頁第271頁第272頁第273頁第274頁第275頁
MT9072
Data Sheet
75
Zarlink Semiconductor Inc.
9.1.8 HDLC Transmitter
Following initialization and enabling, the transmitter is in the Idle Channel state (Mark Idle), continuously sending
ones. Interframe Time Fill state (Flag Idle) is selected by setting the MI bit in register YF2 high
1
. The Transmitter
remains in either of these two states until data is written to the Tx FIFO. YF2 bits EOP (end of packet) and FA
(Frame Abort) are set as status bits before the microprocessor loads 8 bits of data into the 10 bit wide FIFO (8 bits
data and 2 bits status). To change the tag bits being loaded in the FIFO, HDLC Master Control must be written to
before writing to the FIFO. However, EOP and FA are reset after writing to the TX FIFO. The Transmit Byte Count
Register(YF6) may also be used to tag an end of packet. The register is loaded with the number of bytes in the
packet and decrements after every write to the Tx FIFO. When a count of one is reached, the next byte written to
the FIFO is tagged as an end of packet. The register may be made to cycle through the same count if the packets
are of the same length by setting HDLC Master Control bit Cycle.
If the transmitter is in the Idle Channel state when data is written to the Tx FIFO, then an opening flag is sent and
data from Tx FIFO follows. Otherwise, data bytes are transmitted as soon as the current flag byte has been sent. Tx
FIFO data bytes are continuously transmitted until either the FIFO is empty or an EOP or FA status bit is read by the
transmitter. After the last bit of the EOP byte has been transmitted, a 16-bit FCS is sent followed by a closing flag.
When multiple packets of data are loaded into Tx FIFO, only one flag is sent between packets. When the HDLC is
connected to FDL or a transmit channel
The least significant bit of the Transmit FIFO data is sent first on the serial stream.
Frame aborts (the transmission of 7F hex), are transmitted by tagging a byte previously written to the Tx FIFO.
When a byte has an FA tag, then an FA is sent instead of that tagged byte. That is, all bytes previous to but not
including that byte are sent. After a Frame Abort, the transmitter returns to the Mark Idle or Interframe Time Fill
state, depending on the state of the Mark idle control bit.
Tx FIFO underrun will occur if the FIFO empties and the last byte did not have either an EOP or FA tag. A frame
abort sequence will be sent when an underrun occurs.
Below is an example of the transmission of a three byte packet (’AA’ ’03’ ’77’ hex) (Interframe time fill). TXcen can
be enabled before or after this sequence.
(a) Write’0020’hex to Control Register 1
(b) Write’AA’ hex to TX FIFO
(c) Write’03’hex to TX FIFO
(d) Write’01A0’ hex to Control Register 1
(e) Write’77’hex to TX FIFO
-Mark idle bit set
-Data byte
-Data byte
-TXEN; EOP; Mark idle bits set
-Final data byte
The transmitter may be enabled independently of the receiver. This is done by setting the TXEN bit of the Control
Register YF2. Enabling happens immediately upon writing to the register. Disabling using TXen will occur after the
completion of the transmission of the present packet; the contents of the FIFO are not cleared. Disabling will consist
of stopping the transmitter clock. The Status and Interrupt Registers may still be read and the FIFO and Control
Registers may be written to while the transmitter is disabled. The transmitted FCS may be inhibited using the Tcrci
bit of HDLC Master Control Register. In this mode the opening flag followed by the data and closing flag is sent and
zero insertion still included, but no CRC. That is, the FCS is injected by the microprocessor as part of the data field.
This is used in V.120 terminal adaptation for synchronous protocol sensitive UI frames.
1. If the MT9072A HDLC transmitter is set up in the Mark-Idle state (YF2 MI is 1) then it will occasionally (less than 1% of the
time) fail to transmit the opening flag when it is changed from the disabled state to the enabled state (YF2 TXEN changed
from 0 to1). A missing opening flag will cause the packet to be lost at the receiving end.
This problem only affects the first packet transmitted after the HDLC transmitter is enabled. Subsequent packets are
unaffected.
相關PDF資料 |
PDF描述 |
|---|---|
| MT9072AB | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| MT9072AV | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| MT90820 | Large Digital Switch |
| MT90820AL | Large Digital Switch |
| MT90820AL1 | Large Digital Switch |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MT9072AB | 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:Octal T1/E1/J1 Framer |
| MT9072AV | 制造商:Microsemi Corporation 功能描述:FRAMER E1/J1/T1 3.3V 256BGA - Trays 制造商:Zarlink Semiconductor Inc 功能描述:FRAMER E1/J1/T1 3.3V 256BGA - Trays |
| MT9072AV2 | 制造商:Microsemi Corporation 功能描述:FRAMER E1/J1/T1 3.3V 220BGA - Trays 制造商:Zarlink Semiconductor Inc 功能描述:FRAMER E1/J1/T1 3.3V 220BGA - Trays |
| MT90732 | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:CMOS E2/E3 Framer (E2/E3F) |
| MT90732AP | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:CMOS E2/E3 Framer (E2/E3F) |
發布緊急采購，3分鐘左右您將得到回復。