參數資料
型號: P83C366BDA
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: Microcontrollers for PAL/SECAM TV with OSD and VST(帶 OSD和 VST的在PAL/SECAM TV中應用的微控制器)
中文描述: 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQCC68
封裝: PLASTIC, MO-047AC, SOT-188-2, LCC-68
文件頁數: 25/80頁
文件大?。?/td> 266K
代理商: P83C366BDA
1999 Jun 11
25
Philips Semiconductors
Product specification
Microcontrollers for NTSC TVs with On-Screen
Display (OSD) and Closed Caption (CC)
P8xCx70 family
11.5
Busy interrupt and Watchdog Timer control
11.5.1
BUSY
INTERRUPT AND
W
ATCHDOG
C
ONTROL
R
EGISTER
(BWC)
The BUSY signal can generate an interrupt (PX7) to the CPU if enabled by IEN1.5, the vector address is 0063H. This
register is used to enable/disable the BUSY interrupt and the Watchdog Timer.
Table 32
BUSY interrupt and Watchdog Control Register (SFR address EBH)
Table 33
Description of the BWC bits
11.5.2
I
NTERRUPT
R
EQUEST
(RBUSY)
RBUSY is bit 5 of the SFR IRQ1 (address 98H). A falling edge of the active BUSY signal generates a pending interrupt
to the CPU and forces the RBUSY bit HIGH. In the service routine, this bit should be cleared before returning to the main
routine. As long as RBUSY is HIGH, a pending interrupt is always present. Each time BUSY is activated by a falling edge,
the RBUSY is set HIGH. If the interrupt is not served by the next falling BUSY edge, then RBUSY is written to HIGH again
and no error of overrun is indicated.
7
6
5
4
3
2
1
0
EW
BUSY
BIT
SYMBOL
EW
DESCRIPTION
7 to 2
1
These 6 bits are not used.
Enable Watchdog Timer.
If EW = 0, then the Watchdog Timer is disabled. If EW = 1,
then the Watchdog Timer is enabled and the Power-down mode is disabled.
When BUSY = 0, an active external interrupt will generate an interrupt to the CPU.
When BUSY = 1, external interrupts are disabled.
0
BUSY
It is not recommended to update the display RAM when the BUSY signal is active
(LOW), due to the effect it may have on the OSD display. The display RAM can be
updated when the BUSY signal is inactive.
相關PDF資料
PDF描述
P83C566BDA Microcontrollers for PAL/SECAM TV with OSD and VST(帶 OSD和 VST的在PAL/SECAM TV中應用的微控制器)
P87C770AAR Microcontrollers for NTSC TVs with On-Screen Display OSD and Closed Caption CC
P83C270 Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
P83C370 Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
P87C770 Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
相關代理商/技術參數
參數描述
P83C366BDR 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for PAL/SECAM TV with OSD and VST
P83C366CBP 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for PAL/SECAM TV with OSD and VST
P83C370 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for NTSC TVs with On-Screen Display OSD and Closed Caption CC
P83C370AAR 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for NTSC TVs with On-Screen Display OSD and Closed Caption CC
P83C380 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for monitors with DDC interface, auto-sync detection and sync proc.