參數資料
型號： P83C592FFA
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： Single-chip 8-bit microcontroller with CAN controller(帶CAN控制器的單片8位微控制器)
中文描述： 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC68
封裝： PLASTIC, SOT-168-3, MO-047AE, LCC-68
文件頁數： 39/108頁
文件大小： 650K
代理商： P83C592FFA
1996 Jun 27
39
Philips Semiconductors
Product specification
8-bit microcontroller with on-chip CAN
P8xC592
13.5.6
I
NTERRUPT
R
EGISTER
(IR)
The Interrupt Register allows the identification of an interrupt source. When one or more bits of this register are set, a
CAN interrupt (SI01) will be indicated to the CPU. All bits are reset by the CAN-controller after this register is read by the
CPU. This register appears to the CPU as a read only memory.
Table 38
Interrupt Register (address 3)
Table 39
Description of the IR bits
Notes
1.
2.
Overrun Interrupt bit (if enabled) and Data Overrun bit (see Section 13.5.5) are set at the same time.
Receive Interrupt bit (if enabled) and Receive Buffer Status bit (see Section 13.5.5) are set at the same time.
7
6
5
4
3
2
1
0
WUI
OI
EI
TI
RI
BIT SYMBOL
6
5
4
WUI
FUNCTION
7
Reserved.
Reserved.
Reserved.
Wake-Up Interrupt
. The value of WUI is set to:
HIGH (set), when the sleep mode is left. See Section 13.5.4.
LOW (reset), by a read access of the Interrupt Register by the CPU.
Overrun Interrupt
(note 1). The value of OI is set to:
HIGH (set), if both Receive Buffers contain a message and the first byte of another message should
be stored (passed acceptance), and the Overrun Interrupt Enable is HIGH (enabled).
LOW (reset), by a read access of the Interrupt Register by the CPU.
Error Interrupt
. The value of EI is set to:
HIGH (set), on a change of either the Error Status or Bus Status bits, if the Error Interrupt Enable is
HIGH (enabled). See Section 13.5.5.
LOW (reset), by a read access of the Interrupt Register by the CPU.
Transmit Interrupt
. The value of TI is set to:
HIGH (set), on a change of the Transmit Buffer Access from LOW to HIGH (released) and
Transmit Interrupt Enable is HIGH (enabled).
LOW (reset), after a read access of the Interrupt Register by the CPU.
Receive Interrupt
(note 2). The value of RBS is set to:
HIGH (set), when a new message is available in the Receive Buffer and the Receive Interrupt
Enable bit is HIGH (enabled).
LOW (reset) automatically by a read access of Interrupt Register by the CPU.
3
OI
2
EI
1
TI
0
RI
相關PDF資料
PDF描述
P80C592FHA 8-bit microcontroller with on-chip CAN
P83C592FHA 8-bit microcontroller with on-chip CAN
P80C592 8-bit microcontroller with on-chip CAN
P83C592 8-bit microcontroller with on-chip CAN
P87C592EFA 8-bit microcontroller with on-chip CAN
相關代理商/技術參數
參數描述
P83C592FHA 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit microcontroller with on-chip CAN
P83C652EBA 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:CMOS single-chip 8-bit microcontrollers
P83C652EBAA 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:CMOS single-chip 8-bit microcontrollers
P83C652EBB 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:CMOS single-chip 8-bit microcontrollers
P83C652EBBB 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:CMOS single-chip 8-bit microcontrollers
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*