參數資料
型號： P83C770
廠商： NXP Semiconductors N.V.
英文描述： Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
中文描述： 微控制器用于NTSC電視的屏幕顯示（OSD）和字幕（CC）的（在NTSC電視中應用的具有屏幕顯示和字幕關閉特點的微控制器）
文件頁數： 75/80頁
文件大?。?/td> 266K
代理商： P83C770
1999 Jun 11
75
Philips Semiconductors
Product specification
Microcontrollers for NTSC TVs with On-Screen
Display (OSD) and Closed Caption (CC)
P8xCx70 family
25 RELEASE LETTER OF ERRATA
25.1
Bugs with a software workaround
The soft scroll active bit and the top scroll row are not
synchronized. Therefore, it is not possible to calculate
from this bit and the top scroll row the current base row
(the row which is displayed as the lowest one or which
scrolls in). The top scroll row number is incremented
immediately after the soft scroll function is finished but
the soft scroll active bit remains set. The soft scroll
active bit is cleared one field/frame later. A software
workaround is implemented.
If the soft scroll function is to be stopped (write 0
×
20 to
OSD Status Register) the soft scroll should stop
immediately, but it stops at the end of the field/frame.
After stopping the soft scroll function the soft scroll
active bit should be cleared and the top scroll row
number (lower 4 bit of the OSD Status Register) should
be incremented by one. But sometimes the top scroll
row number is incremented by two. Also in the stopped
soft scroll the display sometimes jumps out of the
defined scroll range. For example, the range is defined
from row 0 to 5 and row 8 to 14 is displayed.
A correction is possible after the next frame, which results
in the stopped soft scroll (0.2 after soft scroll has been
started a stop soft scroll is sent) to sometimes generate a
display flicker.
Read/Write problem with access to Display Memory by
the CPU. The error rate is 1/84000 (synchronized
clock). The error is synchronous to the HSYNC with
approximately 11
μ
s delay after HSYNC.
The automatically incremented DPTR didn’t work
correctly.
A move command to the display memory
(MOVX @DPTR,A) or (MOVX A, @DPTR) sometimes
delivers a wrong result (e.g. an ‘A’ should be written/read
but a ‘B’ is stored/read in/from the memory).
A software workaround has been designed.
25.2
Bugs with no workaround
The foreground colour of the first character behind a
double size/width attribute is ignored.
During a double height row, if shadow is active, a north
shadow appears above the last line of the row whether
the underline is active or not.
25.3
Specification problems (unspecified)
Soft scroll function cannot be stopped immediately
(behaviour is not specified in the specification). If the
decoder wants to terminate the soft scroll function, the
soft scroll function stops one field/frame later. A restart
is not possible before the scrolling has stopped.
Therefore, a restart of the soft scroll function must be
delayed by one field/frame. A software workaround is
implemented.
According to the CC specification the time between stop
and start should be no more than 0.433 seconds.
With the method as implemented the start command will
be issued after 0.46 seconds.
The OSD does not allow the active edges of HSYNC
and VSYNC to come at exactly the same moment
Soft scroll does not work, if a double height row is the top
row of the scroll area.
The specification has been changed to ‘the soft scroll
function with double height rows is forbidden’.
相關PDF資料
PDF描述
P83C366BDA Microcontrollers for PAL/SECAM TV with OSD and VST(帶 OSD和 VST的在PAL/SECAM TV中應用的微控制器)
P83C566BDA Microcontrollers for PAL/SECAM TV with OSD and VST(帶 OSD和 VST的在PAL/SECAM TV中應用的微控制器)
P87C770AAR Microcontrollers for NTSC TVs with On-Screen Display OSD and Closed Caption CC
P83C270 Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
P83C370 Microcontrollers for NTSC TVs with On-Screen Display (OSD) and Closed Caption (CC)(在NTSC TV中應用的具有屏幕顯示和字幕關閉特點的微控制器)
相關代理商/技術參數
參數描述
P83C770AAR 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for NTSC TVs with On-Screen Display OSD and Closed Caption CC
P83C834 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit microcontrollers with LCD-driver
P83C834CFP 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit microcontrollers with LCD-driver
P83C845BBP 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Microcontrollers for TV and video MTV
P83C851FBA 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:CMOS single-chip 8-bit microcontroller with on-chip EEPROM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*