PIC16C717/770/771
DS41120B-page 152
2002 Microchip Technology Inc.
IPD
Power-down Current(3)
D020D
D020E
D020F
D020G
PIC16LC7XX
0.3
0.1
2.0
5.0
1.5
3.0
A
VDD = 3V, -40°C to 85°C
VDD = 3V, -40°C to 125°C
VDD = 2.5V, -40°C to 85°C
VDD = 2.5V, -40°C to 125°C
D020
D020A
D020B
D020C
PIC16C7XX
1.4
1.0
4.0
8.0
3.5
6.0
A
VDD = 5.5V, -40°C to 85°C
VDD = 5.5V, -40°C to 125°C
VDD = 4V, -40°C to 85°C
VDD = 4V, -40°C to 125°C
*
These parameters are characterized but not tested.
Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: This is the limit to which VDD can be lowered without losing RAM data.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern, and temperature also have an
impact on the current consumption.
The test conditions for all IDD measurements in active Operation mode are:
OSC1 = external square wave, from rail to rail; all I/O pins tristated, pulled to VDD
MCLR = VDD; WDT enabled/disabled as specified.
3: The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD or VSS.
PIC16LC717/770/771
Standard Operating Conditions (unless otherwise stated)
Operating temperature
0°C
≤ TA ≤ +70°C for commercial
-40°C
≤ TA ≤ +85°C for industrial
-40°C
≤ TA ≤ +125°C for extended
PIC16C717/770/771
Standard Operating Conditions (unless otherwise stated)
Operating temperature
0°C
≤ TA ≤ +70°C for commercial
-40°C
≤ TA ≤ +85°C for industrial
-40°C
≤ TA ≤ +125°C for extended
Param.
No.
Sym
Characteristic
Min Typ Max Units
Conditions