參數資料
型號: PSF21911
廠商: SIEMENS A G
元件分類: 數字傳輸電路
英文描述: ISDN Echocancellation Circuit for Terminal Applications IEC-Q TE
中文描述: DATACOM, ISDN ECHO CANCELLER
文件頁數: 98/164頁
文件大?。?/td> 1401K
代理商: PSF21911
PSB 21911
PSF 21911
Monitor Channel Programming
Semiconductor Group
98
11.97
3.2
Monitor Channel Programming
Important
: This chapter applies only in μP mode.
The example on
page 99
illustrates the read-out of the transceiver’s identification
number (ID). It consists of the transmission of a two-byte message from the control unit
to the transceiver in IOM channel 0. The transceiver acknowledges the receipt by
returning a two-byte long message in the monitor channel. The procedure is absolutely
identical for Monitor channel 1.
The
μ
P starts the transfer procedure after having confirmed that the monitor channel is
inactive. The first byte of monitor data is loaded into the transmit register MOX. Via the
Monitor Control Register MOCR monitor interrupts are enabled and control of the MX-bit
is handed over to the IEC-Q TE. Then transmission of the first byte begins. The U-
transceiver reacts to a low level of the MX-bit by reading and acknowledging the monitor
channel byte automatically. On detection of the confirmation, the IEC-Q TE issues a
monitor interrupt to inform the
μ
P that the next byte may be sent. Loading the second
byte into the transmit register results in an immediate transmission (timing is controlled
by IEC-Q TE). The U-transceiver receives the second byte in the same manner as
before. When transmission is completed, the U-transceiver sends “End of Message”
(MX-bit high).
It is assumed that a monitor command was sent that needs to be answered by the U-
transceiver (e.g. read-out of a register). Therefore, the U-transceiver commences to
issue a two-byte confirmation after an End-of-Message indication from the IEC-Q TE has
been detected. The IEC-Q TE notifies the
μ
P via interrupt when new monitor data has
been received. The processor may then read and acknowledge the byte at a convenient
instant. When confirmation has been completed, the U-transceiver sends “EOM”. This
generates a corresponding interrupt in the IEC-Q TE. By setting the MR-bit to high, the
monitor channel is inactive, the transmission is finished.
相關PDF資料
PDF描述
PSB21911 ISDN Echocancellation Circuit for Terminal Applications IEC-Q TE
PT3104C 15 WATT 24V TO 5V/12V/15V ISOLATED DC-DC CONVERTER
PT3100-24V 15 WATT 24V TO 5V/12V/15V ISOLATED DC-DC CONVERTER
PT3106C 15 WATT 24V TO 5V/12V/15V ISOLATED DC-DC CONVERTER
PT3402 "2.5V 12A
相關代理商/技術參數
參數描述
PSF21911F 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ISDN Line Interface
PSF21911N 制造商:未知廠家 制造商全稱:未知廠家 功能描述:?ISDN Echocancellation Circuit for Terminal Applications - 2B1Q Code?
PSF226 制造商:Pentair Technical Products / Hoffman 功能描述:Swing Frame, fits 2200x600mm LtGray, fits 2200x600mm, Steel
P-SF226 制造商:Pentair Technical Products / Hoffman 功能描述:Swing Frame, fits 2200x600mm 制造商:PENTAIR TECNICAL PRODCUTS 功能描述:Swing Frame, fits 2200x600mm
PSF227 制造商:Pentair Technical Products / Hoffman 功能描述:Swing Frame, fits 2200x700mm LtGray, fits 2200x700mm, Steel