UNITED AUTOMATION LIMITED
1 Southport Business Park
Southport, PR8 4HQ, U.K.
Tel (01704)-565713
Fax (01704)-569760
Page No 2 of 2 Issue 2 17/07/98
ORDER CODE
State part number:
Optional extras include:
Note: When ordering a filter the maximum current the QLC is to be used at will be required.
QLC 230V AC
Knob, Dial, Heatsink paste, Filter.
RECOMMENDATION
Other documents available on request, which may be appropriate for your applications.
CODE
IDENTITY
DESCRIPTION
X10229
RFI
Filtering recommendation - addressing EMC Directive
X10213
ITA
Interaction, uses for phase angle and for burst fire control.
X10255
SRA
Safety requirements - addressing theLow Voltage Directive (LVD)
including :- Thermal data/cooling ; “Live” parts warning & Earthing
requirements; Fusing recommendations.
AP02/4
COS
UAL Conditions of sale
NOTE
It is recommended that installation and maintenance of this equipment should be done with
reference to the current edition of the I.E.E wiring regulations (BS7671) by suitably qualified/trained
personnel. The regulations contain important requirements regarding safety of electrical equipment. (For
International standards refer to I.E.C directive IEC 950).
CE MARKING
This product family carries a “CE” mark. This phase angle controller needs a suitable remote filter. For
information see recommendation section and contact our sales desk. (See Declaration of Conformity).
FUSING:
It is recommended to use semiconductor (fast acting) type fuses or circuit breakers (Semiconductor - MCB)
for unit protection. On initial ‘switch on’ some loads may need an increased Factor of Safety (F of S) for
unit and/or device protection. (See SRA Datasheet for further information).
SPECIFICATIONS
Triac limiting RMS. On state current
Unit limiting RMS. On state current
Peak single cycle surge @ 10mS
Max load at 20oC ambient (
without extra heatsink)
10A
Max unit operating temperature
26A
15A
320A
Isolation voltage
I
2
t limiting value for fusing
Mains supply ( within 10%)
Min operating current
Unit storage temperature range -20 to +85oC
2500V rms
112A
2
s
230V ac @ 50/60 Hz
200mA
65oC
FURTHER DIMENSIONS
Shaft diameter
Bush length
6.3mm
5mm
Shaft projection from bush
Standard cable length
30mm
400mm
INSTALLATION