參數資料
型號： RF2945
廠商： RF MICRO DEVICES INC
元件分類： 通信及網絡
英文描述： 433/868/915MHZ FSK/ASK/OOK TRANSCEIVER
中文描述： SPECIALTY TELECOM CIRCUIT, PQFP32
封裝： 5 X 5 MM, PLASTIC, LQFP-32
文件頁數： 6/24頁
文件大?。?/td> 742K
代理商： RF2945
11-220
RF2945
Rev A10 000919
11
T
Pin
14
Function
IF1 BP+
Description
DC feedback node for the 40dB limiting amplifier strip. A 10nF bypass
capacitor from this pin to ground is required.
Same as pin 14.
Interface Schematic
See pin 13.
15
IF1 BP-
See pin 13.
16
IF1 OUT
IF output from the 40dB limiting amplifier. The IF1 OUT output presents
a nominal 330
output resistance and interfaces directly to 10.7MHz
ceramic filters.
17
IF2 IN
IF input to the 60dB limiting amplifier strip. A 10nF DC blocking capaci-
tor is required on this input. The IF2 IN input presents a nominal 330
input resistance and interfaces directly to 10.7MHz ceramic filters.
18
IF2 BP+
DC feedback node for the 60dB limiting amplifier strip. A 10nF bypass
capacitor from this pin to ground is required.
Same as pin 18.
See pin 17.
19
20
IF2 BP-
GND6
See pin 17.
Ground connection for 60dB IF limiting amplifier. Keep traces physically
short and connect immediately to ground plane for best performance.
This pin is the input to the FM demodulator. This pin is NOT AC cou-
pled. Therefore, a DC blocking capacitor is required on this pin to avoid
shorting the demodulator input with the LC tank. A ceramic discrimina-
tor or DC blocked LC tank resonant at the IF should be connected to
this pin.
21
DEMOD IN
22
DATA REF
This pin is used for setting the adaptive Data Slicer DC reference level.
A capacitor from this pin to ground can be used to set the reference
level at the average DC level of the data bit stream.The DC level deter-
mines the bit decision threshold.
23
MOD IN
FM analog or digital modulation can be imparted to the VCO through
this pin. The VCO varies in accordance to the voltage level presented
to this pin. To set the deviation to a desired level, a voltage divider refer-
enced to Vcc is the recommended. This deviation is also dependent
upon the overall capacitance of the external resonant circuit.
This port is used to supply DC voltage to the VCO as well as to tune the
center frequency of the VCO. Equal value inductors should be con-
nected to this pin and pin 25 although a small imbalance can be used
to tune in the proper frequency range.
See pin 24.
24
RESNTR+
25
26
RESNTR-
VCO OUT
See RESNTR+ description.
See pin 24.
This pin is used is supply a buffered VCO output to go to the PLL chip.
This pin has a DC bias and needs to be AC coupled.
27
GND4
GND4 is the ground shared on chip by the VCO, prescaler, and PLL
electronics.
IF1 OUT
IF2 IN
330
330
60 k
60 k
IF2 BP+
IF2 BP-
DEMOD IN
10 k
V
CC
50k
DATA REF
RESNTR-
RESNTR+
4 k
MOD IN
VCO OUT
相關PDF資料
PDF描述
RF2958 2.4GHz SPREAD-SPECTRUM TRANSCEIVER
RF2958PCBA 2.4GHz SPREAD-SPECTRUM TRANSCEIVER
RF2958TR13 2.4GHz SPREAD-SPECTRUM TRANSCEIVER
RF2968 BLUETOOTHTM TRANSCEIVER
RF3160 DUAL-BAND GSM/DCS POWER AMP MODULE
相關代理商/技術參數
參數描述
RF2945-000 制造商:TE Connectivity 功能描述:SESD0402X1BN-0010-098 - Tape and Reel
RF2946-000 制造商:TE Connectivity 功能描述:SESD0402Q2UG-0020-090 - Tape and Reel
RF2948B 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:2.4GHz SPREAD-SPECTRUM TRANSCEIVER
RF2948BPCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:2.4GHz SPREAD-SPECTRUM TRANSCEIVER
RF2948BTR13 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:2.4GHz SPREAD-SPECTRUM TRANSCEIVER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*