- 您現在的位置：買賣IC網 > PDF目錄297336 > S-8233CAFT 3-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 PDF資料下載
參數資料
| 型號： | S-8233CAFT |
| 元件分類： | 電源管理 |
| 英文描述： | 3-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
| 封裝： | TSSOP-16 |
| 文件頁數： | 24/26頁 |
| 文件大?。?/td> | 440K |
| 代理商： | S-8233CAFT |
Battery Protection IC(for a 3-serial-cell pack)
Rev.3.1_00
S-8233C Series
Seiko Instruments Inc.
7
Measurement Circuits
(1) Measurement 1 Measurement circuit 1
Set V1, V2, and V3 to 3.5 V under normal condition. Increase V1 from 3.5 V gradually. The V1 voltage
when COP = 'H' is over charge detection voltage 1 (VCU1). Decrease V1 gradually. The V1 voltage
when COP = 'L' is over charge release voltage 1 (VCSO). Further decrease V1. The V1 voltage when
DOP = 'H' is over discharge voltage 1 (VDD1). Increase V1 gradually. The V1 voltage when DOP = 'L'
is over discharge release voltage 1 (VDU1).
(2) Measurement 2 Measurement circuit 1
Set V1, V2, and V3 to 3.5 V under normal condition. Increase V2 from 3.5 V gradually. The V2 voltage
when COP = 'H' is over charge detection voltage 2 (VCU2). Decrease V2 gradually. The V2 voltage
when COP = 'L' is over charge release voltage 2 (VCD2). Further decrease V2. The V2 voltage when
DOP = 'H' is over discharge voltage 2 (VDD2). Increase V2 gradually. The V2 voltage when DOP = 'L'
is over discharge release voltage 2 (VDU2).
(3) Measurement 3 Measurement circuit 1
Set V1, V2, and V3 to 3.5 V under normal condition. Increase V3 from 3.5 V gradually. The V3 voltage
when COP = 'H' is over charge detection voltage 3 (VCU3). Decrease V3 gradually. The V3 voltage
when COP = 'L' is over charge release voltage 3 (VCD3). Further decrease V3. The V3 voltage when
DOP = 'H' is over discharge voltage 3 (VDD3). Increase V3 gradually. The V3 voltage when DOP = 'L'
is over discharge release voltage 3 (VDU3).
Note: The voltage change rate is 150 V/sec or less under measuring conditions 1 to 3.
(4) Measurement 4 Measurement circuit 2
Set V1, V2, V3 to 3.5 V and V4 to 0 V under normal condition. Increase V4 from 0 V gradually. The V4
voltage when DOP = 'H' and COP = 'H, is over current detection voltage 1 (VIOV1).
Set V1, V2, and V3 to 3.5 V and V4 to 0 V under normal condition. Fix the COVT terminal at VSS,
increase V4 from 0 V gradually. The V4 voltage when DOP = 'H" and COP = 'H' is over current
detection voltage 2 (VI0V2).
Set V1, V2, and V3 to 3.5 V and V4 to 0 V under normal condition. Fix the COVT terminal at VSS,
increase V4 gradually from 0 V at 400
s to 2 ms. The V4 voltage when DOP = 'H" and COP = 'H' is
over current detection voltage 3 (VI0V3).
(5) Measurement 5 Measurement circuit 3
Set S1 to ON, V1, V2, and V3 to 3.5 V, and V4 to 0 V under normal condition and measure current
consumption. I1 is the normal condition current consumption (IOPE), I2, the cell 2 current consumption
(ICELL2), and I3, the cell 3 current consumption (ICELL3).
Set S1 to ON, V1, V2, and V3 to 1.5 V, and V4 to 4.5 V under over discharge condition. Current
consumption I1 is power-down current consumption (IPDN).
(6) Measurement 6 Measurement circuit 3
Set S1 to ON, V1, V2, and V3 to 3.5 V, and V4 to 10.5 V under normal condition. V4/I4 is the internal
resistance between VCC and VMP (RVCM).
Set S1 to ON, V1, V2, and V3 to 1.5 V, and V4 to 4.1 V under over discharge condition. (4.5-V4)/I4 is
the internal resistance between VSS and VMP (RVSM).
相關PDF資料 |
PDF描述 |
|---|---|
| S-8244AAZPH-CEZTFG | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| S-8310BFE-T2 | SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8 |
| S-8338AAEC-P8T1 | 0.16 A SWITCHING CONTROLLER, 1133 kHz SWITCHING FREQ-MAX, DSO8 |
| S-8338ACAA-T8T1 | 0.16 A SWITCHING CONTROLLER, 1133 kHz SWITCHING FREQ-MAX, PDSO8 |
| S-8460B00AFT-TB | 0.1 A SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S-8233CAFT-TB | 功能描述:電池管理 4.25V 3-Cell Serial RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel |
| S-8233CAFT-TB-G | 功能描述:電池管理 4.25V 3-Cell Serial RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel |
| S82343 | 制造商:Intel 功能描述: |
| S82344A | 制造商:Intel 功能描述:PERIPHERAL (MULTIFUNCTION) CONTROLLER, 160 Pin, QFP |
| S823519 WAF | 制造商:Intel 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。