參數資料
型號: S108T02
廠商: SHARP ELECTRONICS CORP
元件分類: 繼電器,輸入/輸出模塊
英文描述: TRIGGER OUTPUT SOLID STATE RELAY, 3000 V ISOLATION-MAX
封裝: PLASTIC, SIP-4
文件頁數: 13/13頁
文件大?。?/td> 240K
代理商: S108T02
9
S108T02 Series
S208T02 Series
For additional design assistance, please review our corresponding Optoelectronic Application Notes.
● Standard Circuit
Tr1
R1
D1
V1
+VCC
AC Line
Load
ZS
ZS : Surge absorption circuit (Snubber circuit)
SSR
S108T02
S208T02
3
4
2
1
Sheet No.: D4-A01801EN
● Degradation
In general, the emission of the IRED used in SSR will degrade over time.
In the case where long term operation and / or constant extreme temperature fluctuations will be applied to
the devices, please allow for a worst case scenario of 50% degradation over 5years.
Therefore in order to maintain proper operation, a design implementing these SSRs should provide at least
twice the minimum required triggering current from initial operation.
(a) Make sure there are no warps or bumps on the heat sink, insulation sheet and device surface.
(b) Make sure there are no metal dusts or burrs attached onto the heat sink, insulation sheet and device sur-
face.
(c) Make sure silicone grease is evenly spread out on the heat sink, insulation sheet and device surface.
Silicone grease to be used is as follows;
1) There is no aged deterioration within the operating temperature ranges.
2) Base oil of grease is hardly separated and is hardly permeated in the device.
3) Even if base oil is separated and permeated in the device, it should not degrade the function of a device.
Recommended grease : G-746 (Shin-Etsu Chemical Co., Ltd.)
: G-747 (Shin-Etsu Chemical Co., Ltd.)
: SC102 (Dow Corning Toray Silicone Co., Ltd.)
In case the optional heat sink is screwed up, please solder after screwed.
In case of the lead frame bending, please keep the following minimum distance and avoid any mechanical
stress between the base of terminals and the molding resin.
Some of AC electromagnetic counters or solenoids have built-in rectifier such as the diode.
In this case, please use the device carefully since the load current waveform becomes similar with rectangu-
lar waveform and this results may not make a device turn off.
3.8mm MIN.
相關PDF資料
PDF描述
S112S01 TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX
S112S02 TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX
S212S02 TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX
S11MD5TS 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER
S11MD5VP 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER
相關代理商/技術參數
參數描述
S108T02F 功能描述:固態繼電器-PCB安裝 4-SIP ZERO-C 8mA RoHS:否 制造商:Omron Electronics 控制電壓范圍: 負載電壓額定值:40 V 負載電流額定值:120 mA 觸點形式:1 Form A (SPST-NO) 輸出設備:MOSFET 封裝 / 箱體:USOP-4 安裝風格:SMD/SMT
S109 功能描述:TOOL LONG NOSE MICRO SERRATED 4" RoHS:是 類別:工具 >> 鉗子、扳手 系列:Super Tools™ 標準包裝:1 系列:- 尖端 - 類型:針頭,直形 工具類型:鉗子 特點:人機工程型手柄,ESD 安全,鋸齒狀 長度:5.75"(146.05mm) 重量:0.23 磅(104.33g)
S-109 制造商:Leach International Corporation 功能描述:LRE - Bulk
S-1091-A 制造商:Molex 功能描述:
S-1091-A-SP 制造商:Molex 功能描述: