參數資料
型號： SAK-C164CH-8FM
廠商： INFINEON TECHNOLOGIES AG
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
封裝： 0.65 MM PITCH, METRIC, PLASTIC, QFP-80
文件頁數： 20/74頁
文件大?。?/td> 917K
代理商： SAK-C164CH-8FM
&
Data Sheet
25
1999-08
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 8 multiplexed input channels
and a sample and hold circuit has been integrated on-chip. It uses the method of
successive approximation. The sample time (for loading the capacitors) and the
conversion time is programmable and can so be adjusted to the external circuitry.
Overrun error detection/protection is provided for the conversion result register
(ADDAT): either an interrupt request will be generated when the result of a previous
conversion has not been read from the result register at the time the next conversion is
complete, or the next conversion is suspended in such a case until the previous result
has been read.
For applications which require less than 8 analog input channels, the remaining channel
inputs can be used as digital input port pins.
The A/D converter of the C164 supports four different conversion modes. In the standard
Single Channel conversion mode, the analog level on a specified channel is sampled
once and converted to a digital result. In the Single Channel Continuous mode, the
analog level on a specified channel is repeatedly sampled and converted without
software intervention. In the Auto Scan mode, the analog levels on a prespecified
number of channels are sequentially sampled and converted. In the Auto Scan
Continuous mode, the number of prespecified channels is repeatedly sampled and
converted. In addition, the conversion of a specific channel can be inserted (injected) into
a running sequence without disturbing this sequence. This is called Channel Injection
Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the
conversion results into a table in memory for later evaluation, without requiring the
overhead of entering and exiting interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs
calibration cycles. This automatic self-calibration constantly adjusts the converter to
changing operating conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal
operation of the A/D converter.
In order to decouple analog inputs from digital noise and to avoid input trigger noise
those pins used for analog input can be disconnected from the digital IO or input stages
under software control. This can be selected for each pin separately via registers
P5DIDIS (Port 5 Digital Input Disable).
相關PDF資料
PDF描述
SAK-C164CI-8EMCB 16-BIT, OTPROM, 20 MHz, MICROCONTROLLER, PQFP80
SAK-C164SV-2RF 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP64
SAF-C164SV-2RF 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP64
SAF-C164SV-2R25F 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP64
SAK-C167CS-4R40M-BA 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
相關代理商/技術參數
參數描述
SAK-C164CI-825MDB 制造商:Infineon Technologies AG 功能描述:
SAK-C164CI-8E25M 制造商:Infineon Technologies AG 功能描述:IC 16BIT MCU 64K OTP MQFP80 164 制造商:Infineon Technologies AG 功能描述:IC, 16BIT MCU, 64K OTP, MQFP80, 164
SAKC164CI8E25M DB 制造商:Infineon Technologies AG 功能描述:
SAK-C164CI-8E25M DB 功能描述:16位微控制器 - MCU 16-Bit Sngl-Chip 5V 25MHz OTP RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
SAKC164CI8E25M DB TR 制造商:Infineon Technologies AG 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*