參數資料
型號： SC16C2550IB48,151
廠商： NXP Semiconductors
文件頁數： 20/46頁
文件大?。?/td> 0K
描述： IC UART DUAL W/FIFO 48-LQFP
標準包裝： 250
特點： 2 通道
通道數： 2，DUART
FIFO's： 16 字節
電源電壓： 2.5V，3.3V，5V
帶自動流量控制功能： 是
帶IrDA 編碼器/解碼器： 是
帶故障啟動位檢測功能： 是
帶調制解調器控制功能： 是
帶CMOS： 是
安裝類型： 表面貼裝
封裝/外殼： 48-LQFP
供應商設備封裝： 48-LQFP（7x7）
包裝： 托盤
其它名稱： 568-3261
935270020151
SC16C2550IB48-S
Philips Semiconductors
SC16C2550
Dual UART with 16 bytes of transmit and receive FIFOs and IrDA
encoder/decoder
Product data
Rev. 03 — 19 June 2003
27 of 46
9397 750 11621
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
[1]
Whenever any MSR bit 0-3 is set to logic 1, a Modem Status Interrupt will be generated.
7.9 Scratchpad Register (SPR)
The SC16C2550 provides a temporary data register to store 8 bits of user
information.
7.10 Enhanced Feature Register (EFR)
Enhanced features are enabled or disabled using this register.
Bits 0 through 4 provide single or dual character software ow control selection.
When the Xon1 and Xon2 and/or Xoff1 and Xoff2 modes are selected, the double
8-bit words are concatenated into two sequential numbers.
1
MSR[1]
DSR [1]
Logic 0 = No DSR change (normal default condition).
Logic1=The DSR input to the SC16C2550 has changed state
since the last time it was read. A modem Status Interrupt will be
generated.
0
MSR[0]
CTS [1]
Logic 0 = No CTS change (normal default condition).
Logic 1 = The CTS input to the SC16C2550 has changed state
since the last time it was read. A modem Status Interrupt will be
generated.
Table 19:
Modem Status Register bits description…continued
Bit
Symbol
Description
Table 20:
Enhanced Feature Register bits description
Bit
Symbol
Description
7
EFR[7]
Automatic CTS ow control.
Logic0=Automatic CTS ow control is disabled (normal default
condition).
Logic 1 = Enable Automatic CTS ow control. Transmission will stop
when CTS goes to a logical 1. Transmission will resume when the CTS
pin returns to a logical 0.
6
EFR[6]
Automatic RTS ow control. Automatic RTS may be used for hardware ow
control by enabling EFR[6]. When Auto-RTS is selected, an interrupt will
be generated when the receive FIFO is lled to the programmed trigger
level and RTS will go to a logic 1 at the next trigger level. RTS will return to
a logic 0 when data is unloaded below the next lower trigger level
(programmed trigger level 1). The state of this register bit changes with the
status of the hardware ow control. RTS functions normally when
hardware ow control is disabled.
0 = Automatic RTS ow control is disabled (normal default condition).
1 = Enable Automatic RTS ow control.
相關PDF資料
PDF描述
SC16C2552BIA44,529 IC UART DUAL W/FIFO 44-PLCC
SC16C550BIB48,157 IC UART SINGLE W/FIFO 48-LQFP
SC16C554DBIA68,529 IC UART QUAD W/FIFO 68-PLCC
SC16C554IB80,528 IC UART QUAD SOT315-1
SC16C650BIB48,151 IC UART SINGLE W/FIFO 48-LQFP
相關代理商/技術參數
參數描述
SC16C2550IN40 制造商:PHILIP 功能描述:
SC16C2550IN40,112 功能描述:IC UART DUAL W/FIFO 40-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - UART（通用異步接收器/發送器） 系列:- 標準包裝:250 系列:- 特點:* 通道數:2，DUART FIFO's:16 字節 規程:RS232，RS485 電源電壓:2.25 V ~ 5.5 V 帶并行端口:- 帶自動流量控制功能:是 帶IrDA 編碼器/解碼器:是 帶故障啟動位檢測功能:是 帶調制解調器控制功能:是 帶CMOS:是 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:托盤 其它名稱:XR16L2551IM-F-ND
SC16C2552 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Dual UART with 16-byte transmit and receive FIFOs
SC16C2552B 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs
SC16C2552BIA44 功能描述:UART 接口集成電路 16CB 2.5V-5V 2CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*