參數資料
型號: SC16C852VIBS,557
廠商: NXP Semiconductors
文件頁數: 28/55頁
文件大小: 0K
描述: IC UART DUAL W/FIFO 48-HVQFN
標準包裝: 2,450
特點: 可編程
通道數: 2,DUART
FIFO's: 128 字節
規程: RS485
電源電壓: 2.5V
帶自動流量控制功能:
帶IrDA 編碼器/解碼器:
帶故障啟動位檢測功能:
帶調制解調器控制功能:
帶CMOS:
安裝類型: 表面貼裝
封裝/外殼: 48-VFQFN 裸露焊盤
供應商設備封裝: 48-HVQFN EP(6x6)
包裝: 托盤
其它名稱: 935283102557
SC16C852VIBS
SC16C852VIBS-ND
SC16C852V
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 5 — 21 January 2011
34 of 55
NXP Semiconductors
SC16C852V
Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
[1]
When using a software flow control the Xon/Xoff characters cannot be used for data transfer.
7.15 Transmit Interrupt Level register (TXINTLVL)
This 8-bit register is used store the transmit FIFO trigger levels used for DMA and
interrupt generation. Trigger levels from 1 to 128 can be programmed with a granularity
of 1. Table 27 shows trigger level register bit settings.
[1]
For 32-byte FIFO mode, refer to Section 7.3 “FIFO Control Register (FCR)”.
7.16 Receive Interrupt Level register (RXINTLVL)
This 8-bit register is used store the receive FIFO trigger levels used for DMA and interrupt
generation. Trigger levels from 1 to 128 can be programmed with a granularity of 1.
Table 28 shows trigger level register bit settings.
[1]
For 32-byte FIFO mode, refer to Section 7.3 “FIFO Control Register (FCR)”.
1
X
Transmit Xon1 and Xon2/Xoff1 and Xoff2
X
0
No receive flow control
X
1
0
Receiver compares Xon1/Xoff1
X
0
1
Receiver compares Xon2/Xoff2
1
0
1
Transmit Xon1/Xoff1
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
0
1
Transmit Xon2/Xoff2
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
1
Transmit Xon1 and Xon2, Xoff1 and Xoff2
Receiver compares Xon1 and Xon2, Xoff1 and Xoff2
Table 26.
Software flow control functions[1] …continued
Cont-3
Cont-2
Cont-1
Cont-0
TX, RX software flow controls
Table 27.
TXINTLVL register bits description
Bit
Symbol
Description
7:0
TXINTLVL[7:0]
This register stores the programmable transmit interrupt trigger levels for
128-byte FIFO mode.[1]
0x00 = trigger level is set to 1
0x01 = trigger level is set to 1
...
0x80 = trigger level is set to 128
Table 28.
RXINTLVL register bits description
Bit
Symbol
Description
7:0
RXINTLVL[7:0]
This register stores the programmable receive interrupt trigger levels for
128-byte FIFO mode.[1]
0x00 = trigger level is set to 1
0x01 = trigger level is set to 1
...
0x80 = trigger level is set to 128
相關PDF資料
PDF描述
SC16C2550BIBS,128 IC UART DUAL W/FIFO 32-HVQFN
D38999/20FE26PN CONN RCPT 26POS WALL MNT W/PINS
VE-B4Z-IY CONVERTER MOD DC/DC 2V 20W
VE-B4W-IY CONVERTER MOD DC/DC 5.5V 50W
MS3126F10-6SW CONN PLUG 6POS STRAIGHT W/SCKT
相關代理商/技術參數
參數描述
SC16C852VIBS-G 功能描述:UART 接口集成電路 1.8V 2CH UART 128B FIFO 5MBPS RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C852VIBS-S 功能描述:UART 接口集成電路 1.8V 2CH UART 128B FIFO 5MBPS RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C852VIET 功能描述:UART 接口集成電路 1.8V 2CH UART 128B FIFO 5MBPS RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C852VIET,115 功能描述:UART 接口集成電路 1.8V 2CH UART 128B RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C852VIET,118 功能描述:UART 接口集成電路 UART 2-CH 128Byte FIFO 1.8V 36-Pin RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel